on DL_HD none channels are working on129W, how to fix

[tester2]

hi guys i got DL_HD, 119 & 110 is working fine, but on 129W none channels are working. i did below antenna srettings for all sats

Satellite ------------ 119W ----------- 110W -------------- 129W
LNB Power --------- On -------------- On --------------- On
LNB Type ------------Single ------------ Single ------------- Single
LNB Frequency ----- 10.750 ---------- 11250 ------------- 11.250
LNB 22KHz ---------- Off ------------ Off -------------- On
DiSEqC SW 1.0 ------- 1 --------------- 2 ---------------- 3
DiSEqC SW 1.1 ------- Off ------------- Off --------------- Off
Legacy SW ---------- Off -------------- Off --------------- Off



I am using 3 LNB's on 3 seperate Dishes,
for 119W i am using 10750 LNB, all channells working fine, this LNB gives both signal 118W & 119W.
for 110W i am using 11250 standard LNB, all channels working fine
for 129W i am using 11250 standard LNB, i got very good signall & i scan all channels successfilly like PENTOGAN etc, only the thing this dish channels not working at all.
and 110W & 129W both having same brand LNB.


hope you guys know what i have to do in settings.


thanks for your replies

[dishuser]

does your p$ have hd?

[tester2]

yes my p$ having HD, & i tried PENTOGAN channel on my Viewsat Ultra, that channel & some other channels working fine on viewsat ultra on 129W.

but none channels workinh on DREAMLINK HD on 129W.

so what settings i have to do to run this HD channels.


thanks

[dishuser]

what do you have transmission set at?

[tester2]

i did this DVBS OPSK or Turbo 8PSK , to TRANSMISION SET , still i did not get 129W chaannels work.


is there any thing else i can try, please let me know.

thanks

UPDATE :


there are most of the channels are not working on 129W, so i check one by one then i found some channels are working.

so all good now.

thanks