Gotta get it going - can't find directions!

[gumby77]

Hi Kids,

I'm trying to resurrect an old nFusion Phoenix.

Right now if I spark it up and go in to System Settings and then S/W Version I see:

R3X 1.26
S/W R3XCAMCUBN20080_U48
CRC is Checked

So what next ?


I tried to load a file called: nfusion_boot_v130.bin but it loads very fast (which is odd) and when done
the display shows " Nenu " in block text!

Any ideas?

Cheers'
Gumby

[gumby77]

Hi,

Found this for my nFusion PHOENIX and got nowhere really !

Did step 1 - all I got on the box was the word Nenu - nothing

Did step 2 - and got the GOOD on the screen and it rebooted - and got the menu up that says:R3X 1.26 and
S/W R3XCAMCUBN20080_U48

Did step 3 - and got the same NENU and no reboot

Did step 4 - and got the GOOD but no re-boot, manually restarted the box and now have nothing on the device at
no power or menu or anything - any other sage advice because doing the steps below did'nt do squat!!



DON'T USE THIS FOR TRYING TO SETUP NOI !!

The link is called " Easy NFSD NOI Setup ......

Here is the cut and paste from the "Instructions.txt"

1. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode.Load only if European conversion like T54/T58 is currently loaded.
2. Load this file u48 factory file from July 2009 also in MAIN mode.
3. Load this file next... boot file v.130 also in BOOT mode.
4. Lastly load this file 090928 sol phoenix sd v153 1 (Maintenance release) in MAIN mode.
5. Then load newest file which is nfusion-154.2-255.bin in MAIN mode.
6. Setup LNBs
7. Scan Channels
8. Go to channel 200 and turn off receiver
6. Start NOI
7. Go to Settings and enter your NFPS Info. and hit save. Be sure to use colons in the key 61:03:40:34 and so on.
8. Go to Main and hit Start. If you see snow your all set. If you get a connection error try using the server IP instead.
9. Turn on receiver and watch TV.


Cheers'
Gumby

[gumby77]

OK,

Reloaded the U48 factory bin and now the PHOENIX receiver boots and I have a menu.

That helps .....

I just tried to launch the NOI 131.exe that's part of the zip package in this "Easy NFSD NOI.zip"
and my malwarebyte's tells me that the .EXE file has a backdoor.bot in it!

I think that's part of the program when you run this NOI dealy - can anyone confirm that !?

Cheers'
Gumby