Display blank with channel indicator showing Main

[jriver309]

Hi I need help on my 360P, was working fine but not getting all channels after last ECM, so I rescanned a few TP's to get certain ones back, well after last attempt it went blank and now when you turn on channel goes from 8.8.8.8 to just showing Main. Any help appreciated. Thanks

[It's Jafo]

Credit to Sp0iler:

Force load the factory bin.
Load the factory bin to your usb stick.
Insert the stick and shut the box off from the rear switch.
While holding the "ok" button in on the box, restart from the rear switch.Hold the "ok" button for at least 5 seconds when you boot from the rear.
This will put the box in USB mode and you can use the buttons on the box to navigate and force load the file.When your in usb mode,"USBL" will be displayed on the the box.
Restart as normal and load the current file for your box .
If your on component video, you'll need to downgrade to standard video (yellow output) to see the Usb mode screen.

Good luck,
Sp0iler

[jriver309]

Credit to Sp0iler:

Force load the factory bin.
Load the factory bin to your usb stick.
Insert the stick and shut the box off from the rear switch.
While holding the "ok" button in on the box, restart from the rear switch.Hold the "ok" button for at least 5 seconds when you boot from the rear.
This will put the box in USB mode and you can use the buttons on the box to navigate and force load the file.When your in usb mode,"USBL" will be displayed on the the box.
Restart as normal and load the current file for your box .
If your on component video, you'll need to downgrade to standard video (yellow output) to see the Usb mode screen.

Good luck,
Sp0iler

My 360 has been working so good I have forgotten which is the latest bin.

[jriver309]

Ok I think I have other issues because I did the force load and still same thing.

[It's Jafo]

Did you load the "Factory Bin". ?

[jriver309]

Is there a step by step section anymore showing which bins to use for each step to recover a receiver. Thanks

[It's Jafo]

If you cant get it to take the factory bin , or the factory bin didn't fix your issue, no other file will help.

[jriver309]

wow what a bummer, was working great till i did a rescan wonder if the ihub is still good and i get another box. anyone have a suggestion where i can get a deal on a used one

[It's Jafo]

Test you dongle with this:
http://www.satfix.net/showthread.php?119735-Easy-I-hub-upgrade-and-V82-fix

[It's Jafo]

Unhook everything from the box and try again to load the factory bin.
Your problem is most likely software related.
What happens when you try to get into "Usb mode" and force load the file ??

[jriver309]

It will go to the USB screen see the file, then you will see it counting down in blocks from like 20 and then back to blank screen and display showing main

[It's Jafo]

Give the desktop loader a shot.

[jriver309]

When I say display shows main I mean on the channel indicator

[It's Jafo]

Oh yes. Were very familiar with the error.Have seen it many times from other members.
Normally a factory reload fixes it.
You got a good one going there.

[jriver309]

Ok I finally got the screen back after many force feedings but now have serval issues and first I apologize for so many questions this box is so durable never had issues and all my setup files were on computer that crashed. Ok so I have version 4.12 on wiz but I cannot get it show IP so someone have a screen shot of how wiz program supposed to look so I can try to set. second issue I cannot get into netword settings, its there but when I click on it just blinks and nothing so I cannot set my sub codes. third I cannot get all channels scanned in like 300. I had a great shortcut to how to setup 110 and 119 on here but that went away, I think I am scanning in wrong. Again thanks so much for help really sorry I am so forgetful.

[badboyz4life]

ive done the same thing i juust give up,i have another sv thats loseing sound on channels

[jriver309]

I got it working just kept trying things but now big issue is doing a scan I cannot get all channels, 300, 131, 180's 110 113 that is why I asked about transponder list on another post

[jriver309]

I figured it out thanks to those that offered help appreciate it.