PDA

View Full Version : Many channels missing. Help!


Scanner
03-23-2013, 02:16 PM
Is it just me or is everybody in the same boat? Since Thursday, I can only get 250 channels after scanning 110 (only). B4 Thursday there was 579 channels. Now only about 6 of the 250 channels actually work. I have two private servers and both show connected on the channels that work. Channel 109 works and some of the PPV's ie:526. I have my new Jynxbox Ultra HD and a Limesat Ultra. Both scanned 110 with 250 channels resulting and only about 6 working. Not complaining, just looking for help. Tks
Anubis
03-23-2013, 02:35 PM
There were a couple ecms in the last couple days so depending on your server certain channels are up to begin with.
Did you factory default, disable your P$'s then scan your sats individually...ie set your settings for 119 lock on so it shows 119 at the top then scan exit then go back in to menu and then set your next sat then scan?
Sounds like you don't have your settings correct.
Scanner
03-23-2013, 08:26 PM
Only using 110. Reset to factory mant times, but did not disable P$. Will try that and get back 2u. Tks
Scanner
03-25-2013, 02:51 AM
Didn't work ..... still only getting 250 channels.
Anubis
03-25-2013, 05:46 PM
Are you using blind scan? If you are don't.
iq180
03-25-2013, 06:17 PM
Didn't work ..... still only getting 250 channels.
you are missing TPs, google= lyngsat= and have a look at the tp list for sat 110.0w, add the missing TPs to your list,
one other thing do a factory reset before you add the TPs, if you do a factory reset after you add them it will remove all
you have added.
hope this helps.
Anubis
03-25-2013, 07:40 PM
you are missing TPs, google= lyngsat= and have a look at the tp list for sat 110.0w, add the missing TPs to your list,
one other thing do a factory reset before you add the TPs, if you do a factory reset after you add them it will remove all
you have added.
hope this helps.
He is missing more than tp's if he is only scanning 250 out of 500 plus.
Either using blind scan, wrong setting, bad switch/lnb or dish has moved. Possible the JB module is going as well.
rune144
03-25-2013, 07:43 PM
yea missing some channels
iq180
03-25-2013, 07:54 PM
He is missing more than tp's if he is only scanning 250 out of 500 plus.
Either using blind scan, wrong setting, bad switch/lnb or dish has moved. Possible the JB module is going as well.
in his first post he did say he was only scanning CHs on sat 110.0w so I would think there is no switch, so he is missing TPs
or the module is not switching from H to V or V to H,jmo,LOL.
Anubis
03-25-2013, 07:59 PM
in his first post he did say he was only scanning CHs on sat 110.0w so I would think there is no switch, so he is missing TPs
or the module is not switching from H to V or V to H,jmo,LOL.
Oh ya... One sat. lol
Well it's one of what we covered either way.