help to configure lnbs jynxboox v2

[turbohd]

I have a jynxbox hd v2 with the jb200

dish plus antenna with DPP lnbs pointing at 119, 118, 110 and 129
i was using this antenna with a modded 722

722 if unplugged now

also dpp44 and power injector connected to jynxbox

i have looked for a guide everywhere on how to configure the lnbs to do the channel scan

i can not find anything

someone told me i need LNB1, LNB2, LNB3 AND LNB4, one for each bird

but on my menu only have LNB1 and LNB2 i was told i need to add the extra lnbs, but
i can not make it show on the menu

please help

[StanW]

This thread might give you some insight :

http://www.satfix.net/showthread.php?127687-Jynxbox-ultra-HD-v2-and-Dish-1000

[bkr™]

I have a jynxbox hd v2 with the jb200

dish plus antenna with DPP lnbs pointing at 119, 118, 110

also dpp44 and power injector connected to jynxbox

but on my menu only have LNB1 and LNB2 i was told i need to add the extra lnbs, but
i can not make it show on the menu

please help
Do not connect the fta receiver to the same port the power inserter is on. The power inserter on the DPP output port 1 yes.
The receiver to output port 2, 3, 4 only. The LNB 1 refers to tuner slot 1 prolly the JB200 if you have the V2 model. The LNB 2 is for the optional tuner in slot 2 if you have. You select the DiSEqC ports 1 thru 4 for the different sat locations, usually 1 for 119, 2 for 110, 3 for 129, and 4 for the 118.