JynxBox UltraHD V2 82/91 DSS Dual Legacy OEM Lnb setting

[snowleo]

I was trying to config JynxBox UltraHD V2 with 82/91 with DSS Dual Legacy OEM Lnb D-Shape

The junxbox is acting weird..
Its not reliable at all..
All different setting for Diseq1 ports , LNB legacy sets : will show signal and scan most of channels or will not show signal and say no program found!
-Even setting Diseq1 ports to off and LNB legacy to off will scan 82 and get channels, weird no?!

-After many twicks i find the proper config for 91 :

LNB1(fixed)
11250
DiseqC1.0 : port1
Legacy : OCS-DP
and i got 633 channels

but 82 i cant config it on port2, so i'm still trying all setting, sometime i get 150channels, anothertimes i get 270channels with many duplicated and a lot missing..

- Whats the proper setting for 82 ?

[SunChero]

having the same issue here .. sometimes the box will show ths signal around 80 to 90% .. i move up and down .. and the signal go down to 40%
i have to scan multiple times sometimes it finds them .. other times .. it will say no program found.
i suspect there is a bug somewhere .. the signal cant go from 90 to 40 in less then few seconds ...