can someone help me please

[daemian]

2 days ago I got service with satlobo (my service status is connected). my service is for satellites 110-119-118-7 129 but now i have a dish 500 twin lbn. my receiver is a sv 360 elite pvr. my signal is 73 but the quality is 0.
my settings are:
connection - loop through
lnb type- ocs-dp
lnb frequency- 11250
22khz- off
lnb power- on
transponder- 12224
search option- all
network search- on
diseqc- port 1
motor- disable
legacy switch- off

i changed the cables. new antenna. connected a cable to ground. and still no quality.
:bawl::bawl::bawl:

[torpainter]

2 days ago I got service with satlobo (my service status is connected). my service is for satellites 110-119-118-7 129 but now i have a dish 500 twin lbn. my receiver is a sv 360 elite pvr. my signal is 73 but the quality is 0.
my settings are:
connection - loop through
lnb type- ocs-dp
lnb frequency- 11250
22khz- off
lnb power- on
transponder- 12224
search option- all
network search- on
diseqc- port 1
motor- disable
legacy switch- off

i changed the cables. new antenna. connected a cable to ground. and still no quality.
:bawl::bawl::bawl:
the settings you posted should be for 119 ,If you change tp freq to 12297 does 119 show up in settings? Does quality change?
110 settings will be the same except port will be 2

[daemian]

I tried that and nothing happened. But now the service status says connect fail.

[steven charles]

I tried that and nothing happened. But now the service status says connect fail.friend have you tried rebooting your receiver thru the back button turn it off and back on and try this settings for sat 110 try tp 12282 and port 2 and for sat 119 try like torpainter said tp 12239 or 12297 which ever gives you better signal and quality with port 1 for sat 119,the problem should be on your settings or you might have to tweak your dish a little until you get the signal and quality if your settings are right,good luck friend....