DP Plus LNB

[Actv8]

Hello All,

I am trying to get dp plus lnb to work with my Limesat but I am having no luck. I can get 91 but not 82 sat.

I have one RG6 coming in to the LS. I read I do not need a switch.

Is there a diagram on to set up?

Thanks

[torpainter]

what general area doo you live in?
you also need to post your settings

[Actv8]

I am in Ontario area

I cancelled bell last week and I want to use the dish on my LS HD Air to get 82 & 91. I know my friend had two lnb's and one diseqc switch. We tried to use SW21 switch sat 1 82 and sat 2 91 and also tried sat 1 91 and sat 2 82. We tried lnb type ocs-dp, single and LT lnb1 and 2 LF 11250.

82 diseqc 1, diseqc none , tp 12224, lnb 11250, 22khz tone off, multi dish switch off, all channels, lnb power on. 91 disqc 2, and everything else the same as 82 settings.

Do I need to run another cable from the dish?

[StanW]

Don't alter the bell setup in any way - the lnb that you are using has a built in switch. In your settings you should specify lnb type as ocs-dp ( or inequivalent and diseqc setting 1 for 91 and 2 for 82.