setting up configuration on Jynxbox hd

[rodeni]

Hi gents. I need help with setting up configuration on Jynxbox hd. I have 3 satelite dishes . First is dish pro plus pointing at 82/91. Second is dishpro plus pointing at 110/119. Third is single dish lnb pointing at 129, from this dish line is coming into dishpro plus 110/119.
So basically I have 2 lines coming out from 2 dishpro plus . I have chieta 4x1 diseq switch, ecoda 2 in 1 , and sw 21 switch . Which switch to use and what is my configuration on Jynxbox.

Thank you,

[bkr™]

I would get a 22KHz switch, because you cannot use a diseqc on top of the dish pro dishes that already use diseqc to select between sats, and sw-21 switch is not compatible w/ dp lnbs, only legacy type. 1 dish into non 22KHz side, and the other dish into the 22KHz side.

[rodeni]

Thank you ,what about my receiver settings,what is mu settings on 81,92,110,119,129

[iq180]

Hi gents. I need help with setting up configuration on Jynxbox hd. I have 3 satelite dishes . First is dish pro plus pointing at 82/91. Second is dishpro plus pointing at 110/119. Third is single dish lnb pointing at 129, from this dish line is coming into dishpro plus 110/119.
So basically I have 2 lines coming out from 2 dishpro plus . I have chieta 4x1 diseq switch, ecoda 2 in 1 , and sw 21 switch . Which switch to use and what is my configuration on Jynxbox.

Thank you,
you are going to need to add a power inserter, the jynx will not power them LNBs without help, you mite want to look at getting
a DP44 switch with power inserter.

[rodeni]

So dp 44 is my only options, that is my luck from all the switches that i have I don't have that one. What is settings on receiver if i conect just dish without bell.

[iq180]

So dp 44 is my only options, that is my luck from all the switches that i have I don't have that one. What is settings on receiver if i conect just dish without bell.
to setup dn, I would use a DPP twin LNB for sat 110 & 119 with the sat in port for 129, the DPP plus twin LNB has a built in switch
the first port on the lnb you need a power inserter or an old dn receiver to power the LNBs, hook the jynx to the second port, the
# 3 port is a sat in port for your extra dish and lnb, this can be used for sat 129 or what ever sat you want to add,
in the receiver menu you would set port 1 for sat 119=port 2 for 110, and port 3 would be your extra single dish & lnb for sat 129 or
what ever sat you want, your LNB freq should be 11250.
if you need more help just ask.

[rodeni]

So what about northern bird, with this config you have 119 port 1,110 port 2,129 port 3 this is only for dish and i still have other antena with dish plus lnb pointed at 82/91 .thank you for advice.

[iq180]

So what about northern bird, with this config you have 119 port 1,110 port 2,129 port 3 this is only for dish and i still have other antena with dish plus lnb pointed at 82/91 .thank you for advice.

I think the answer to your problem would be to add a second tuner, then you use one tuner for DN & the other one for B3V.