HD problem with dreamlink

[thepro111]

I just got my dreamlink HD and have a problem. I installed factory file 106,and then file 119 followed by a factory reset. The SK200 is installed. I have 110,119,82,and 91 sats. Sat 82 showed about 300 channels after scanning. I have 2 servers in make2dream HD. My problem is that the sd channels come in perfectly but when I go to a HD channel(d*sh and b*v) I get nothing but green pictolation in several layers. I can hear some sound in the background. Since I was able to scan the HD channels I assume that the SK200 board is ok. Correct? What seems to be the problem with the HD channels?
Any and all help gratefully appreciated......

[dishuser]

I just got my dreamlink HD and have a problem. I installed factory file 106,and then file 119 followed by a factory reset. The SK200 is installed. I have 110,119,82,and 91 sats. Sat 82 showed about 300 channels after scanning. I have 2 servers in make2dream HD. My problem is that the sd channels come in perfectly but when I go to a HD channel(d*sh and b*v) I get nothing but green pictolation in several layers. I can hear some sound in the background. Since I was able to scan the HD channels I assume that the SK200 board is ok. Correct? What seems to be the problem with the HD channels?
Any and all help gratefully appreciated......make sure it's seated correctly

[bobby]

if using HDMI cable try using component cables (blue, green, red and white and red for audio), the sk200 modules are not the best to begin with and known to have multiple issues,
if your getting sound and no pic on bev HD channels that is because the audio is not encrypted but on dn the audio is encrypted so if you are getting sound and no pic on dn channels than I would start by trying a different HDMI cable or component cables, if that does not work you might want to look at the sk200 module and as dishuser pointed out make sure it is seated properly

[thepro111]

I tried a set of component cables and got the same streaks of pixelation-almost like green ink thrown on the screen with some pixels shown. This is the second sk200 I tried. The original one wouldn't even scan the HD channels on 82.I have another one on the way from the dealer. Maybe lucky three?? It seems to be pointing at the sk200.

[theshark]

theres a post in here about not using 119 bin lots of issues with it i went back to 116 or use 117 sats seem to not appear with 119 bin

[dishuser]

theres a post in here about not using 119 bin lots of issues with it i went back to 116 or use 117 sats seem to not appear with 119 bin
there's nothing wrong with 1.19