Setting up Sats.(moved)

[goadus]

I'm having a problem setting up 110/119 on my Jbox hd. 119 was no problem. I'm gonna try to post some pics to better explain.18349 These are my settings for 119. Getting lots of channels. Still not sure about the setup.

Then I tried to setup 110. This is with the 12224 setting.18350 And #1 of 38 tp's. Notice the sats don't match and the I&Q suck.

Here it is after I changed the tp#18351 to #16 and check the I & Q. Now when I scan I get no channels on 110. Not sure what I'm doing wrong. Any ideas :bawl:

[iq180]

I'm having a problem setting up 110/119 on my Jbox hd. 119 was no problem. I'm gonna try to post some pics to better explain.18349 These are my settings for 119. Getting lots of channels. Still not sure about the setup.

Then I tried to setup 110. This is with the 12224 setting.18350 And #1 of 38 tp's. Notice the sats don't match and the I&Q suck.

Here it is after I changed the tp#18351 to #16 and check the I & Q. Now when I scan I get no channels on 110. Not sure what I'm doing wrong. Any ideas :bawl:
on your last pic you have the port set to port 1 for sat 110, it should be port 2, that's why at the top of the pic you see sat 119,
and you need to post what LNB you have, your settings look like you have DPP on a dish 500.

[Gamer]

I moved your post out of the files section so you can get helped. From what I see in your settings for 110 when you are getting S and Q you are locking into 119 instead of 110.It could be a problem with your switch. I dont have one of these recs but I am sure someone will step in and help you out.

[StanW]

I'm having a problem setting up 110/119 on my Jbox hd. 119 was no problem. I'm gonna try to post some pics to better explain.18349 These are my settings for 119. Getting lots of channels. Still not sure about the setup.

Then I tried to setup 110. This is with the 12224 setting.18350 And #1 of 38 tp's. Notice the sats don't match and the I&Q suck.

Here it is after I changed the tp#18351 to #16 and check the I & Q. Now when I scan I get no channels on 110. Not sure what I'm doing wrong. Any ideas :bawl:
What kind of lnb(s) are you using ? External switch - if so which one ?

[goadus]

on your last pic you have the port set to port 1 for sat 110, it should be port 2, that's why at the top of the pic you see sat 119,
and you need to post what LNB you have, your settings look like you have DPP on a dish 500.

It is a dish 500 with 2 single old lnb's. As far as pic 3 of 3 it shows DiSEqC1.0 on port 2. So you're saying port2 for 110 and port 1 for 119. I'll try it and see what happens.

[StanW]

It is a dish 500 with 2 single old lnb's. As far as pic 3 of 3 it shows DiSEqC1.0 on port 2. So you're saying port2 for 110 and port 1 for 119. I'll try it and see what happens.
So you're using a switch ? Which type of lnbs - ocs-dp in the settings might be incorrect .

[edgarr]

So you're using a switch ? Which type of lnbs - ocs-dp in the settings might be incorrect .

Yes 2 single old lnb's are not OCS-DP just 11250 freq.

[goadus]

Well I tried it and I'll be darned if it didn't work! Now I'm deleting all channels and rescanning. And I thought I could count to 2 in the right order:thumbsup:

[goadus]

Yes 2 single old lnb's are not OCS-DP just 11250 freq. Well I don't think I had that many choices in the menu for lnb's but I'll double check after scanning.

[goadus]

Well I don't think I had that many choices in the menu for lnb's but I'll double check after scanning.

This is what I have: ocs-dp, legacy twin lnb1, legacy twin lnb2, legacy quad lnb 1 and 2

[edgarr]

This is what I have: ocs-dp, legacy twin lnb1, legacy twin lnb2, legacy quad lnb 1 and 2

Yes i know i have same thing , ALL you do is set it to OFF and leave everything else the way you have in pics

[goadus]

A great big thanks goes out to you guys that helped me straighten this out. I swapped ports and changed lnb types and now have over 1000 ch. between the two lnb's. Can't wait to add the third lnb and do this all over again!

[tito2020]

nice enjoy

[TJCams]

I was having the same problem, but seem to be good now. Although I only have about 850-900 channels scanned, and for some reason I don't think I am getting the HD channels... :( might be bad JB200?

[goadus]

If you can get 9421 your jb200 is probably ok. That is a free HD channel.