PDA

View Full Version : Help on Aiming 82W



azs2000
05-12-2013, 12:22 PM
I am in Toronto area trying to get 82W. I have a 18" circular dish with 91W already setup. Now I am trying to get 82W as well. I have circular LNBs with 11250 frequency. I have spent several hours to get signal for 82W but most I was able to get 59 (Signal) and 63 (Quality). Is it possible to get 82W with this setup in Toronto area? During my trial and error I was able to find Sat 72.7W but unsuccessful of getting 82W. Even at Quality 63 it is not locking the Sat so I am unsure about the Sat I am getting the signal for. Please advise.

StanW
05-12-2013, 12:27 PM
An 18 dish will work fine from your location. What type of lnbs/switch/bracket are you using? Looking from behind the dish which lnb is picking up 91?

Did you look at disjointed.com for dish setting coordinates?

azs2000
05-13-2013, 02:21 AM
Both are circular LNB with 11250 freq. I am using diseqc switch. 91 is on the center. Looking from behind the dish 82 is on the right of 91. It is not a magic bracket but one similar to it.

StanW
05-13-2013, 11:59 AM
Both are circular LNB with 11250 freq. I am using diseqc switch. 91 is on the center. Looking from behind the dish 82 is on the right of 91. It is not a magic bracket but one similar to it.
If 91 is coming in on the left lnb than 82 should come in by simply skewing the dish . Try connecting 82 directly ( no switch) - should be easier to dial in.