transponder for 119

[steveb111]

I have a dp plus lnb and a 20 inch dell dish round im trying to alighn 119 what is the trans ponder for it?when I go to port 1 I get great signal on 110 I assume 119 should come in right?please help lol

[dishuser]

I have a dp plus lnb and a 20 inch dell dish round im trying to alighn 119 what is the trans ponder for it?when I go to port 1 I get great signal on 110 I assume 119 should come in right?please help lol
you're not pointed correctly

[steveb111]

well I get 110 no prob it should give me 119 bang on my skew is set to 100 were is should be for y yoks

[dishuser]

well I get 110 no prob it should give me 119 bang on my skew is set to 100 were is should be for y yoks
dpp is port 1 for 119

[steveb111]

ok then whats the transponder for 119 I tried different port settings whe I was on port one I tried different transpnders and 119 did not come in

[dishuser]

ok then whats the transponder for 119 I tried different port settings whe I was on port one I tried different transpnders and 119 did not come in
12297
but you need to move your dish

[steveb111]

move you meen the skew?i tried moving the sqew to 90 but it still didn't work the last time I did it I allighend 110 and bang 119 came in on 12297 now it does not

[dishuser]

move you meen the skew?i tried moving the sqew to 90 but it still didn't work the last time I did it I allighend 110 and bang 119 came in on 12297 now it does not

move the dish I said
never mentioned skew

[Terryl]

The dish needs to be set in-be-tween the two satellites, and you need the DP twin LNB on it to get both satellites, or two DPP signal LNB's, one for each satellite.


If you only getting 110 then you need to set your switching right, if using the DP twin LNB then Diseqc switch port #1 is for that satellite, use TP 12297 to find that bird, Diseqc switch port #2 is for 110, the TP for that bird is 12224.

If you have two separate LNB's on a "Y" yoke then you need to set the Diseqc switch your using up for the correct satellite.

I would go to dishpointer.com and enter your location, then select the "Multi LNB" use the dish 500 setting or the 110/119 combo, this will give you the correct pointing information for your location, zoom into where your located and move the marker to your dish location, this will give you a line on a map to point the dish.

[steveb111]

thank you so much I will do that buddy thanks for the help