Jynxbox Ultra HD dont lock SAT signal

[Rizz]

Hi Guys,

I need some help I am using Jynxbox hd for more then year i had some issue but unit was runing since 3 days i lost my signal did every thing but no luck.

I have 97w.91w,82w,110w,119w,118w,129w, all are working fine with my other receiver setting are exactly same like my other reseiver.

I purchased new JB200 and install in 2nd slot and booom everything start working again but after 3 or 4 hours lost a picture again when I press info button i have all the signal and quality above 90% but no picture my PS servers are also showing connected after while going through all the setting i notice when i select any of my SAT none are locking in means I do see signal but no banner on top after selecting a SAT and since then i am trying different settinsg also tried just singal cable from dish to receiver just to check but same thing .

I am wondering and if any one here had same problem and what you did to fix that please share with us .

one more thing i removed JB100 because tuner was gone so I am only ruining JB200 in slot 2.

Receiver info
Jynxbox V1 upgraded to V2
Firmware : V1.2.39

I thank in advance for any help...

[greg]

put the jb 200 tuner in slot one you do not need that jb 100

[Fastcompany]

See if you have a picture in channel 9421. That's an open HD channel.

[bobby]

put the jb 200 tuner in slot one you do not need that jb 100

he can not put the jb200 in slot 1 of a v1 jynx, the jb200 can only be installed in slot 2 on a v1

[Rizz]

I have that installed in slot 2 , i get all the signal and quality but still don't lock the SAT.
he can not put the jb200 in slot 1 of a v1 jynx, the jb200 can only be installed in slot 2 on a v1

[Rizz]

Hi guys one more question some on told me if i have Jynxbox V1 I cant put JB200 without modification to the tuner any one here know if that is true if yes what modification required ?

Thanks

[bobby]

Hi guys one more question some on told me if i have Jynxbox V1 I cant put JB200 without modification to the tuner any one here know if that is true if yes what modification required ?

Thanks
if using a v1 and jb200 the jb200 can only be used in slot #2 and the jb200 does not need any modification