help!

[justinherm]

I have done these steps with no luck,I'm testing viewsat with my setup so setup is good not sure what im doing wrong.please help.THANKS


1. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode.

2. Load this file u48 factory file from July 2009 also in BOOT mode.

3. Load this file next... boot file v.130 also in BOOT mode.

4. Load this file 090928 sol phoenix sd v153 1 (Maintenance release) in MAIN mode.

5. Load the file named boot_126.bin.in BOOT mode.

6. Load the file named nfusion_factory_U17.bin in BOOT mode.

7. Load the file named XSTV4.14.bin in MAIN mode.

8. Do a factory default <- very important! Menu > Newcamd Setting > Factory Default

9. Now Menu TO Newcamd Setting > Server Info>OK> 5585

Enter your info
“C” button – clear
“i” button – cap / small letters / number
Menu button - previous menu

When doing url leave second one blank

Same as password and username and port to leave second one blank.

When doing DES make sure you do 2 number then a space and so on
Like this...

61 03 40 34 45 40 69 70 98 71 23 41 21 34

[tbird686]

well the des you have to input it

12:34:45:67:78 and so on.

well that is for the noi program if you using nfusion

[runamok]

I have done these steps with no luck,I'm testing viewsat with my setup so setup is good not sure what im doing wrong.please help.THANKS


1. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode.

2. Load this file u48 factory file from July 2009 also in BOOT mode.

3. Load this file next... boot file v.130 also in BOOT mode.

4. Load this file 090928 sol phoenix sd v153 1 (Maintenance release) in MAIN mode.

5. Load the file named boot_126.bin.in BOOT mode.

6. Load the file named nfusion_factory_U17.bin in BOOT mode.

7. Load the file named XSTV4.14.bin in MAIN mode.

8. Do a factory default <- very important! Menu > Newcamd Setting > Factory Default

9. Now Menu TO Newcamd Setting > Server Info>OK> 5585

Enter your info
“C” button – clear
“i” button – cap / small letters / number
Menu button - previous menu

When doing url leave second one blank

Same as password and username and port to leave second one blank.

When doing DES make sure you do 2 number then a space and so on
Like this...

61 03 40 34 45 40 69 70 98 71 23 41 21 34


Did you reboot receiver with rear switch after entering all info?
If so and still a no go then start with step 5.When you get to step 7 load the new ikspr 5.04 file.Follow the rest of setup then exit menu's to a working cnl then reboot with rear switch.

[justinherm]

I got it! miss placed number. thanks guys