Sw21

[rambos420]

Anyone having any issues using a sw21 with this box it will not switch for me but works fine with 22khz switch. much rather use sw21 if possible

[Nostradamus]

apparently the 22kz switch will work better with the jynx than a sw21... but if you have 2 dishes going into the switch, 1 switch works and 1 switch doesn't what difference does it make which switch you use. Most people would use the one that works for them rather than just over complicate things

[rambos420]

hey good enough just making sure that it was not just my set up the 22khz will work fine. soon im replacing my dp lnbs with legacy so then i can put the 22khz after a 4x1 diseqc switch instead of sw21 to make room for all 6 lnbs as right now i cant use a diseqc on the 1000.2 dp lnb for 110 119 129 and the dp twin for 82 91 as they both use diseqc commands thanks for ur help

[bkr™]

Sw-21 switches do not work w/ dp or dpp lnbs such as the dish 1000.2, that is why the 22KHz switch works. The sw-21 will work w/ legacy type lnbs only.

[TJCams]

I had lots of issues during my setup with the SW21 switches. I went with an EMP Centauri 4 X 1 and have been having no issues at all. That is, once I figured out I had a faulty JB200 that was causing some issues.

[rambos420]

hey thanks. Yep i have gone through 2 jb200 8psk they got replaced for free luckly