X-FTA with the Goo bin

[airjam]

I had a number of X-FTA routers knocking around and flashed with the DD-WR-GOO2 and can confirm working great on Nfusion HD.

Note this is only for the Nfusion receiver and you will lose the Gargoyle GUI. Follow the instructions included in the download.

Worked for me. Flash at your own risk.

Thanks to goofather .... You are the best.

[redbaron1]

Do you know if the serial port still works?



I had a number of X-FTA routers knocking around and flashed with the DD-WR-GOO2 and can confirm working great on Nfusion HD.

Note this is only for the Nfusion receiver and you will lose the Gargoyle GUI. Follow the instructions included in the download.

Worked for me. Flash at your own risk.

Thanks to goofather .... You are the best.

[Sam Crow]

Not sure why you would want the serial port as the Nf Does not use it. from what I have read the Goo Bin is for only one reciever Only. You have to use the Long version of Openwrt and load files n make changes to it if u want to try more than one Box or use the other ports for a router etc.

Hope this helps some

[ChillyWilly]

Do you know if the serial port still works?

I believe the serial port drivers were stripped out of xx-client in order to fit it on a micro bin

[goofather]

The micro bin has no serial drivers, so neither does the modified goo bin.

If you want to use xx-client for the other 4 protocols you will have to manually install it on a router running something like OpenWRT.

The goo bin is for nfusion only.....