hd channels slow to change

[sk8ing3986]

Hello,

I have a jynxbox v2 connected to 1000.2 on port 2 with power inserter (side labeled input switch) connected to lnb port 1 for power. Nothing wired to other side labeled "to satillete reciever in". Can some confirm this is the right way to setup?

The first days it worked great. Now when switching between hd channels it takes a long time. The sd channels change with regular speed.

Wanted to know if anyone has any advice. I also have the power inserter outside. We had a heat wave the last couple of days and dont know if that could effect it. The green power led on the power supply is still on.

[dustdogger]

Probably nothing to do with your dish. When changing channels watch on the left side of the info box. You'll see the word "wait" appear and then "server #". The word "wait" will appear while the unit is sending a request to the server. If the server load is high or for other reasons, channel changes can take different amounts of time. Hope this makes sense.

[Benney]

I have heard that some servers have effected Jynx this way.

[sk8ing3986]

Thank you both.

From what you mentioned it is a server side issue?

Is there anything I can do from the cilent side?