reboot issues with T4 after connecting ethernet?

[torpainter]

If you are having a reboot issue can you post what make and model of router you are using?
thanks

[dishuser]

here's what I've found so far
Linksys WRT160N-worx
Asus WL-330-GE-don't
Asus WL-520-GU/GC-don't

[horney toad]

here's what I've found so far
Linksys WRT160N-worx
Asus WL-330-GE-don't
Asus WL-520-GU/GC-don't so does D-Link work...........cheers......Horney Toad

[Anubis]

so does D-Link work...........cheers......Horney Toad

Do you see it posted as of yet?

[aidejr]

I have seen it be said that if the user is going to use a b*ll 2wire router that they are not to hook up at this time. I new file is needed.

[Peter88]

I have (B*LL) 2 Wire Inc. 2701HG-G. It does not work with Dreamlink. Works with K-BOX Prodigy w/K-Hub.

[ftanewbie]

what about 2 Wire 3600 HGV any reports on this model not working? ;)

[StanW]

What's gaylink ? :noidea:

[azolaik]

hi
i have my dreamlik working with bell 2wire but when i try it for the other people with same router won t work,so when i checked the defference is:in my home i use bell router plus dlink hub router and my receiver is plug it in trought dlink hub.
i hope this info can help.

[Peter88]

don't work with Powerline 500Mbps Ethernet Adapters (Royal - RPL-500D)

[forzaazzurri]

As a b*ll customer you are entitled to get a router upgrade called connection hub. The 2 wire modem is ancient.

[Peter88]

B*ll 2701HG-G is a router modem combo made by 2 Wire Inc. and it does not work.

[horney toad]

Do you see it posted as of yet?oops poor wording on my part.....D-Link works well on my T4......
sorry bout that.........cheers .....HT

[onbase]

If you are having a reboot issue can you post what make and model of router you are using?
thanks
I have a Scientific Atlanta DCP 2100R2 modem connected to a Cisco Linksys E2500, the T4 is connected from the E2500 and shuts down every time I connect the ethernet cable. Also testing a Prodgy 2 and it works fine. Hope this info helps.
Thanks

[searayonthereef]

I have its the Ovislink ov504wb wireless adsl2/2+router
Says eithernet not connected. I tried piggy backing my dlink to it. Same results. Going to try disabling the router and see if I can just use the modem part and connect the dlink. Hope my combo modem gets on the list for the fix.

[gatorbobby]

When it comes to b@#l modem router cant you just disable the wifi router part and use it as a modem? I would just attach in my case a lynksis 1750 to the modem and use it as my router and attach my dreamlink to it. I had to do this with my internet provider as it kept interfering with my old stb.

[torpainter]

When it comes to b@#l modem router cant you just disable the wifi router part and use it as a modem? I would just attach in my case a lynksis 1750 to the modem and use it as my router and attach my dreamlink to it. I had to do this with my internet provider as it kept interfering with my old stb.

the t4 works with bell modem/router

[tommyboy]

from post number 11...to forza, did you have success getting a new 'connection hub' free of charge? Or know if anyone getting this replacement for free? I ask because I want to do the same.