File load via loader

[abouttosnap]

1. Turn stb off via back switch
2. Connect null cable to serial port of stb and to serial port of pc.
3. While holding down the OK button on the front panel flip back switch on. USBL should show on the display of stb.
4. Open up loader and either click on connect icon or STB then connect and select com port.
5. Click on the download file icon or STB then download file (PC->STB).
6. Make sure you have Main Only(*.rom) showing in the Files of type drop down menu.
6. Select the file to be loaded from the list by highlighting the file then click open or double click on the file.
7. File should begin to transfer. Loading of the file complete when good shows on the display of stb.
8. Reboot stb via back switch. File load via loader complete.

Note: USBL must show on the display of stb or the file will not load.