Problem getting codes to work on VS9000 [Archive] - satFIX.to

RMAC11

08-04-2013, 03:57 PM

Hello everyone, I just got my setup (XFTA ROUTER) this morning & have been working all day to get it going (using a VS9000)... Setting up the router went pretty smooth (getting all the right indications) but it says failed to re-connect to card server. Heres my log :

RECEIVER **** [Sat Aug 3 22:35:27 2013] | Processing packet...
Message Type: ECM | CaID: 1816 | Provider: FFFFFFFF | Video PID: 1422
SID: 0200 | Sequence: 000290

ECM Data:
80 30 8F 07 8D E7 34 20 56 8D 9B 6A D5 1B 7A 26
DD A4 53 89 81 70 C7 C1 4F 5A 71 6A AC 9A 1C 15
71 7E 08 42 5C 80 6C AB 84 08 59 7D 01 06 87 21
1F FD 79 30 C8 0A 87 FF 97 E1 81 B5 80 C1 07 AB
23 68 3D 74 FB AE B3 27 F3 EF 97 30 E2 73 2A 4F
72 61 A7 5E 94 F5 C2 E2 46 E9 B7 D8 41 2F 53 E2
49 71 15 EB C4 81 2D DA 93 4C FA 04 5F AB E2 EF
48 9F 1C DF 0F CD 1D 45 63 BA 1F CA 53 6A 36 7F
ED C3 D6 4B 0E FA 88 C3 97 33 71 41 61 2F 11 DF
CB 88

Trying: newcamd://xxxxx2314959:[email protected] ...
Trying: newcamd://xxxxx2314959:[email protected] ...
Failed to reconnect to card server.

Heres the info they sent me:

User & pass : xxxxx2314959 SERVER: 2.rocketserver.tv PORT: 35922 DESKEY: xxxx xxxx 4540 6970 9871 2341 2134
I emailed my PS & told him the problem & he sent me this(103.31.187.125 ) to use in place of (2.rocketserver.tv ) & still NO GO !

Any ideas what I may doing wrong ??

in the menu on my VS9000, its reporting everything correct:
network setting DHCP
IP address:192.168.1.130
Subnet Mask: 255.255.255.0
Default Gateway:192.168.1.1
DNS 1 :8.8.4.4
DNS 2 :8.8.8.8

Network S/W upgrade
New Software : DX-X00-N APP 200.19

This is all the info I can think of to give you guys !! Anyone have a vs9000 WORKING ??

Thanks :Idontgetit:

hadap123

09-22-2013, 12:26 AM

Hello everyone, I just got my setup (XFTA ROUTER) this morning & have been working all day to get it going (using a VS9000)... Setting up the router went pretty smooth (getting all the right indications) but it says failed to re-connect to card server. Heres my log :

RECEIVER **** [Sat Aug 3 22:35:27 2013] | Processing packet...
Message Type: ECM | CaID: 1816 | Provider: FFFFFFFF | Video PID: 1422
SID: 0200 | Sequence: 000290

ECM Data:
80 30 8F 07 8D E7 34 20 56 8D 9B 6A D5 1B 7A 26
DD A4 53 89 81 70 C7 C1 4F 5A 71 6A AC 9A 1C 15
71 7E 08 42 5C 80 6C AB 84 08 59 7D 01 06 87 21
1F FD 79 30 C8 0A 87 FF 97 E1 81 B5 80 C1 07 AB
23 68 3D 74 FB AE B3 27 F3 EF 97 30 E2 73 2A 4F
72 61 A7 5E 94 F5 C2 E2 46 E9 B7 D8 41 2F 53 E2
49 71 15 EB C4 81 2D DA 93 4C FA 04 5F AB E2 EF
48 9F 1C DF 0F CD 1D 45 63 BA 1F CA 53 6A 36 7F
ED C3 D6 4B 0E FA 88 C3 97 33 71 41 61 2F 11 DF
CB 88

Trying: newcamd://xxxxx2314959:[email protected] ...
Trying: newcamd://xxxxx2314959:[email protected] ...
Failed to reconnect to card server.

Heres the info they sent me:

User & pass : xxxxx2314959 SERVER: 2.rocketserver.tv PORT: 35922 DESKEY: xxxx xxxx 4540 6970 9871 2341 2134
I emailed my PS & told him the problem & he sent me this(103.31.187.125 ) to use in place of (2.rocketserver.tv ) & still NO GO !

Any ideas what I may doing wrong ??

in the menu on my VS9000, its reporting everything correct:
network setting DHCP
IP address:192.168.1.130
Subnet Mask: 255.255.255.0
Default Gateway:192.168.1.1
DNS 1 :8.8.4.4
DNS 2 :8.8.8.8

Network S/W upgrade
New Software : DX-X00-N APP 200.19

This is all the info I can think of to give you guys !! Anyone have a vs9000 WORKING ??

Thanks :Idontgetit:

Mine used to work for 2+ years then one day blank screen.....
traced the error down to "Failed to reconnect to card server." but no matter what i do it fails to connect....zapped unit?

I figured out what the problem was....msg me if you still have this issue

bebe55

09-22-2013, 03:33 AM

I have 2 viewsat 9000 it time to get new box now.I use it for 5-6 year last two week it have the same problem so i PM my server he told me your box too old. So I got new Dreamlink sd the problem solve > I use Garyole Router with viewsat 9000>

Mine used to work for 2+ years then one day blank screen.....
traced the error down to "Failed to reconnect to card server." but no matter what i do it fails to connect....zapped unit?

hadap123

09-22-2013, 04:55 AM

I have 2 viewsat 9000 it time to get new box now.I use it for 5-6 year last two week it have the same problem so i PM my server he told me your box too old. So I got new Dreamlink sd the problem solve > I use Garyole Router with viewsat 9000>

i fixed mine, i use gargoyle too

hadap123

09-29-2013, 12:00 AM

Hello everyone, I just got my setup (XFTA ROUTER) this morning & have been working all day to get it going (using a VS9000)... Setting up the router went pretty smooth (getting all the right indications) but it says failed to re-connect to card server. Heres my log :

RECEIVER **** [Sat Aug 3 22:35:27 2013] | Processing packet...
Message Type: ECM | CaID: 1816 | Provider: FFFFFFFF | Video PID: 1422
SID: 0200 | Sequence: 000290

ECM Data:
80 30 8F 07 8D E7 34 20 56 8D 9B 6A D5 1B 7A 26
DD A4 53 89 81 70 C7 C1 4F 5A 71 6A AC 9A 1C 15
71 7E 08 42 5C 80 6C AB 84 08 59 7D 01 06 87 21
1F FD 79 30 C8 0A 87 FF 97 E1 81 B5 80 C1 07 AB
23 68 3D 74 FB AE B3 27 F3 EF 97 30 E2 73 2A 4F
72 61 A7 5E 94 F5 C2 E2 46 E9 B7 D8 41 2F 53 E2
49 71 15 EB C4 81 2D DA 93 4C FA 04 5F AB E2 EF
48 9F 1C DF 0F CD 1D 45 63 BA 1F CA 53 6A 36 7F
ED C3 D6 4B 0E FA 88 C3 97 33 71 41 61 2F 11 DF
CB 88

Trying: newcamd://xxxxx2314959:[email protected] ...
Trying: newcamd://xxxxx2314959:[email protected] ...
Failed to reconnect to card server.

Heres the info they sent me:

User & pass : xxxxx2314959 SERVER: 2.rocketserver.tv PORT: 35922 DESKEY: xxxx xxxx 4540 6970 9871 2341 2134
I emailed my PS & told him the problem & he sent me this(103.31.187.125 ) to use in place of (2.rocketserver.tv ) & still NO GO !

Any ideas what I may doing wrong ??

in the menu on my VS9000, its reporting everything correct:
network setting DHCP
IP address:192.168.1.130
Subnet Mask: 255.255.255.0
Default Gateway:192.168.1.1
DNS 1 :8.8.4.4
DNS 2 :8.8.8.8

Network S/W upgrade
New Software : DX-X00-N APP 200.19

This is all the info I can think of to give you guys !! Anyone have a vs9000 WORKING ??

Thanks :Idontgetit:

i fixed my by entering my credentials fresh from scratch....ie don't edit or reapply etc. always enter it from scratch (username/pass/ip/port...etc)