Locked up says noch

[Grumps]

Was not scanning all the channels - changed the module - no difference -- did a factory reset ----- went to menu - as it was showing that it was still working -------- went to open and it locked up saying noch - the remote will only shut it off and turn it on ---------- is it time for the HAMMER .

[Nostradamus]

NOCH means No Channel... sounds like you need to scan this point. If the remote will not lket you into the menu option to do a scan I would say your best bet is reload the factory file with a cable and start over again

[DISC69]

sounds like what I went through I tried to update it with factory bin it locked up on me with just 2 lites on so be careful . I looking for extra help now to see what can be done

[bkr™]

Perhaps remove jb-200 module, then re-load factory w/ straight cable from computer using loader program. Heard that works.

[DISC69]

keeping the jb200 out ?

[Grumps]

Thanks fellows - will give it a try

[Grumps]

Before I screw things up any further -- do I use a serial cable or a null cable ????????????????

[dishuser]

Before I screw things up any further -- do I use a serial cable or a null cable ????????????????

serial cable

[bkr™]

Also if you are using newer type computer/laptop and a usb to serial adapter, just plug adapter in directly.

[DISC69]

Open Serial Port..
Sync to serial port..
Target not connect or target is error status!
that's what show when I try to reset the box via the loader . can the box be rest as I only have the red and blue lite on reciever

[bkr™]

Sounds like com port setting not correct on computer, or drivers not loaded to computer.

[DISC69]

no ports correct and drivers good I have taken out the jb200 and tried nothing

[tOr0nTo]

hey DISC69 did you ever get it working? Mine has similar problems, maybe time to ditch it.

[DISC69]

no had to return it to the dealer and they replaced it