Problem loading Limesat_HD_AIR_V2_v131.bin

[coiphim]

My computer doesn't have the COMM port. I bought a USB to Comm cable. I successfully intallled the prolific USB-to-serial COMM software. I downloaded the loader from the file section. When I tried to load the v131.bin using the loader all I get is " COM1: Connecting... Please Wait ". Please help

[Nostradamus]

can't you just load it via flash drive and USB?

[BanHammer]

try a different COM port number

[coiphim]

I got 2 wireless card with USB on it, But none of them work. I have returned both. That is why I tried this option.

[coiphim]

I have tried all the COMMs on the list, but none work.

[Recove52]

are you using the Max HD Loader ?

try this......
C?P from Webwizard...................1) Start the loader and set the com port.
2) Select file to you want to load.
3) While holding in the front panel power button reboot box and hold power
button on box in for at least 5 seconds while rebooting.
4) boot should freeze in display.
5) Press start on loader and file should begin transfer. When countdown is less
than 4 digits numbers are prefixed by letter A will appear.
6) When the display hits zero it should change to -E5-.
7) WAIT !!!! The Display on loader should be at 90% at this point.
8) The receiver should then start counting down prefixed with a "P". I assume
that is for 'PROGRAMMING'.
9) When the receiver displays -End- wait a few seconds, look at loader program
which should now be complete, and then reboot box.

[kingbolt]

Why don't you just use a flash drive to the USB on the box and load the file that way

[ftastudent2]

My computer doesn't have the COMM port. I bought a USB to Comm cable. I successfully intallled the prolific USB-to-serial COMM software. I downloaded the loader from the file section. When I tried to load the v131.bin using the loader all I get is " COM1: Connecting... Please Wait ". Please help
You can load with USB but if your box is like mine 1.31 will not work and if that happens use 1.24 which works well.