V3 JX_NA_firmware_v243_dual feedback

[Anubis]

Post your findings here.

[greg]

is this file from jynxbox media V3 JX_NA_firmware_v243 are no good any tester

[elegua03]

good clon tester

[greg]

so the file will not work if you have a clone are is it only for a real jynxbox hd ultra any feed back on this

[fr8or]

Loaded file and reset, seems that the guide is no longer there.

[fr8or]

Guide was missing due to not having time set to auto.

[Anubis]

is this file from jynxbox media V3 JX_NA_firmware_v243 are no good any tester

Yes file is from Jynx.

[tito2020]

Populates epg to correct time zone.

[amo77]

is ther cc available?

[Anubis]

is ther cc available?
Read the release statement for what the file does. Anything else is a plus.

[greg]

the new file media play back works good the guide respond nice need more updates in the future

[5aszdale]

Has the SW21 issue been resolved yet; I know Jynx works OK with Diseq switches, but my setup has a couple of Zinwell 4 x 4's feeding 4 sw 21's; current S/W not too happy with that kind of setup, does new release address this????

[turtlen]

it doesn't play is mp4 video file,

[Bob Loblaw]

Try another mp4, I am watching an mp4 as I type.

[Satking]

I have a v1 changed the jb 100 to Jb 200 this file works well also.

[shadalert]

I must admit that I'm still disappointed with my Jynxbox V3 which was replaced by Jynx under their one-year warranty when my V1 went completely dead.

-The EPG, primarily with HD channels, doesn't populate as well as it did with previous bins. No matter what method I use, I get at best no more than 3 to 4 hours.
-I'm still disappointed in the PVR function which still has a few minor blips and pauses, no matter how I format the HDD. However, it still works better than it did previously.
-Channel changing seems to be the same as before.
-Still occasional pauses in the picture especially in action scenes.
-A drop-off in video and audio for up to 10-seconds using EPG Guide when switching to a different channel.

On a positive note, Jynxbox is making progress and hopefully there are more improvements to come.

[AeonFlux]

Yeah, still a ways to go but now they are back in the game.

Part of your population of EPG is crappy sat file that could use some work by coders. In the mean time turn network=ON and the box should automatically add the transponders you are missing.

[Problemchild]

When I download this file do I have to unzip it before I install in on my reciever ?

[airjam]

Need to get back on topic ... This is 243 Feedback thread

[jacdem]

thanks beaucoup

[gwrowe]

Tried loading this file after loading the 2.42 file, and it did look like it had burn flashed to receiver, but when I checked S/W Version, it still shows 2.42. Don't know what to do!

[Anubis]

Sounds like it did not load. Factory default a few times and try it again.
You might want to also re download the file to your desktop, unrar/unzip it then drag and drop to your usb stick.

[benice275]

When you press OK button you get list of channels and the name of two programs at the bottom. In file 2.39 as you move up or down the list of channels, you get the name of current program on that channel and this happen with your up and down arrows keys on remote. So you can see the current program names running on other channels without changing the viewing channel. But with file 2.43 this does not happened. It only show the program names the channel you are watching. I know we can go to guide and see the programs names on other channels but you all know when you go to guide there is black screen and no audio for few seconds and if you exit again there is black out for few seconds both video and audio.