36" circular dish with 3 lnb

[pawan129]

Hello
I am try to install 110 118.7 and 129
Plesee tell how it work
Ans is it working with 1000+ or 500+
Thanks

[Terryl]

A circular dish is not shaped right to use more then on LNB on it, a circular or round dish has a round focal point for one LNB, trying to put more then one LNB at the center focal are will cause one or both LNB's to be low in signal, three LNBs will be even harder as the one in the center will have a great signal and the other tow will not.

This is why they have elliptical dishes, an elliptical dish spreads the signals out across the LNB's (like an oval) giving them the best possible signal for that satellite.

Now I'm not saying it can be done, but an elliptical dish will work much better for those 3 satellites, and what happened to 119? If you want 110 you will need 119 also as the channels are split up (not an even split) between the two.

So if your need a 36" dish to get a good signal, then you would need a 36x30 elliptical, like this one.

http://www.incrediblefta.com/item/20/1/1/30x36-elliptical-dish-with-5-dual-lnbs.html

Also what do you mean "is it working with 1000+ or 500+" ??

[pawan129]

I am try to used with super buddy but I do not get any signal. I am using 1000+ for my signal but no luck.
Please guide if I am using super buddy which system I have choose 1000+ or 500+.
Thanks in advance

[Terryl]

For a dish 1000+, on your super buddy you would use the 1000+ setting.

But what satellite are you looking at first, to find the 110/118/119/129 satellites with a dish 1000+ you must first use and set to 119W, use TP 12457R, as all the others below that are spotbeams.

Do you also have the correct pointing information for your location?

If not then go to dishpointer.com and enter your location, then select the Dish 1000+ settings under multi LNB.

Also check the spec's on the super buddy to see if it can supply 650 mA of DC current to the D1000+ LNB's, if not then it wont work.

[pawan129]

Thanks
have one more question if I'm using 32 inch circular dish for ku satellite And standard lnb for 110 129 and 1 dual lnb for 118.7 and 119. What are the setting for superbuddy29, please tell me if I am wrong*Region then ku system and single circular lnb (110, 129) and dual circular lnb for 118.7, 119.*I am try to use this setting, I get lock signal but when I check the I'd it's fail*.

[Costactc]

Single linear for 110 and 119-11250 and 10750 for 118.8.