Some noi input!!!

[ttwizards]

Been reading but can't seemed to figure it out.

[AeonFlux]

Its all in reconfiguring your PC network port to add the correct IP address for the specific HD bin you are using. There is a wizard to do this for you but it really is easy enough to do by hand. The old SUNS was at a specific IP address for which each of these bins was written. I have all that info somewhere, but you can find that out easy enough. What bin are your running?

r25: 123.108.109.22 <-- Must use this bin to get Northern Provider
r27: 210.51.47.147 <-- Use this bin for Southern Provider Only
the subnet mask is 255.0.0.0

There is a whole set of instructions to do this here somewhere if you need them.

I use 27f as it is marked in the files section here. It has the best support for channel lists.

[folcan99]

Been reading but can't seemed to figure it out. I decided to hook up my nfusion HD to my desktop, instead of my laptop. I ran the noi great on my laptop and my desktop , the noi is snowy with a green server1. I have the pc going to router and from router to plug in play that goes to the nfusion with another plug n play. Disabled firewall, can't seemed to figure it out. Thanks for any input.

Here is a guide on how to set it up

[ttwizards]

Thanks so much for the information.

[ttwizards]

Got it to work. I had some wrong numbers. Thanks