suagpinwheel problems

[scooby8888]

hey guys i'm having problems setting up my pinwheel. the antenna settings are different than what i've ever seen and i can't get signal on some sats. i have the standard lnb for the 110 and the 118/119 lnb, dishpro for the bev all running through 4x4 switch to a diseqc switch to the pinwheel. i get the 110 and 118 seems to come in somewhat but the 119 won't come in at all it says no signal.
my setting for the 110 are
lnb type ku lnb
local frequency 11250
22khz off
tp frequency 12224/v/20000
diseqc parameter b
diseqc 1.1 none
legacey switch none
the 118 that come in is
lnb type ku lnb
local frequency 10750
22khz on
tp freq 11928/v/20000 (i know will change)
diseqc prameter b
diseqc 1.1 none
legacey switch none
on the top it will say locked to the sat i'm setting up but when i put it on a channel it will say no signal.

does it seem my settings are ok the 119 i setup if i don't put the lnb type to universal it won't say locked to 119 it stays on 118 and nothing comes up at the bottom of the channel when i put it on a 119 channel.

thanks for looking

[riverman]

you are not very clear in your post. How many 4x4 switches are you using? What Bev. satellites are you pointed at? A Dishpro Lnb will not work with a 4X4 switch. What setting are you using for 119? Dispro & legacy Lnbs do not play well together.

[scooby8888]

oh sorry the dishpro aren't dish pro they are the legacy.
i have 2 4x4s one for the 110 and 118/119 and one for the 91 and 82.
the 119 settings are ku lnb, 10750 for freq, diseqc parameter is b and diseqc 1.1 is none and legacy switch is none it should be the same as the 118 correct ?

[scooby8888]

hmm seems the 119 is working now but bev isn't, it may be down though i had it on earlier before i installed the 2.6 bin so maybe more investigating lol

[holly2012]

If its a dual lnb for 118/119 then leave the settings for both to 10750 if they are seprate lnbs then 119 should be 11250 and 118 should be 10750

[riverman]

your setup is similar to mine. You should have 2 connections going from your 4x4s to your disecq switch. You have port 2 in use on your Disecq, what other port are you using? Your 119 settings should be the same as 118. Definitely not universal. 2 of your satellites should have 22khz on the other 2 off depending how you have them connected.

[holly2012]

How do you have 2 4x4 switches connected to the receiver

[scooby8888]

ya I have the 4x4's going into a diseqc switch then running into the pinwheel. the setup I use is on port 2 and 4 with the ons and offs that work on my jynxbox but it seems a little more complicated at getting it to work. I think I was confused with the parameter thing and diseqc 1.1 I didn't know I had to put something in the diseqc 1.1 setup or just the parameter one.
thanks guys for taking the time.

[fta4me]

1.1 is for motor only

diseqc port 1 = A
diseqc port 2 = B
diseqc port 3 = C
diseqc port 4 = D

so 4x4 work like 22Hkz on/off and share same port

let's assume you have

110/119 = 4x4 = port 1 of diseqc
82/91 = 4x4 = port 2 of diseqc

so set like

110 = KU = 11250 = 22KHZ OFF = DISEQC A
119 = KU = 11250 = 22KHZ ON = DISEQC A

82 = KU = 11250 = 22KHZ OFF = DISEQC B
91 = KU = 11250 = 22KHZ ON = DISEQC B

[riverman]

1.1 is for motor only

diseqc port 1 = A
diseqc port 2 = B
diseqc port 3 = C
diseqc port 4 = D

so 4x4 work like 22Hkz on/off and share same port

let's assume you have

110/119 = 4x4 = port 1 of diseqc
82/91 = 4x4 = port 2 of diseqc

so set like

110 = KU = 11250 = 22KHZ OFF = DISEQC A
119 = KU = 11250 = 22KHZ ON = DISEQC A

82 = KU = 11250 = 22KHZ OFF = DISEQC B
91 = KU = 11250 = 22KHZ ON = DISEQC B

He has 118/119 so frequency would be 10750 so 118/119 = KU = 10750 = 22KHZ ON = DISEQC A. The rest is correct as long as he has 118/119 0n the 22khz on side of the 4x4 switch.

[scooby8888]

ya thats what i have but b and d, my bev still isn't working it seems like signal now anyway not even sure what server is on here bought it setup already it says superiks and i don't know to check to see if bev is up or down lol

[scooby8888]

wow !!
after checking and double checking and waiting and changing setting i got it to work dish and bev and all 4 sats so all is good. the server must be down on bev my tutu came in instantly
thanks alot for taking the time and helping out greatly appreciated :)