Wiz110SR -- no network setting displayed on SV360P

[bextexpex]

I loaded svlan 4.12 onto the Wiz110SR, and confirmed with the WIZnet software that it is loaded onto the hub. I connected the wiz110sr to SV360P box.
I also loaded SV360P_p2028_NoChk.rom onto my SV360P.

My SV360P still cannot detect a network connection.
Kindly let me know how I can fix this problem ? thanks

[poroto40]

set port to 1920
and check serial speed 115200

[bextexpex]

there is no "Network adapter connected" sign, upon boot up..

[It's Jafo]

When you boot up the box, do you see the Adapter connected message?
Do you have "Network settings" showing in the menu ?
Can you "ping" the dongle from a Dos prompt ?
Explain a bit more "Cannot detect a network connection". What do you mean ?

[It's Jafo]

Unhook from the network and plug straight into your computer lan port.
Confirm you changed the Baud rate (speed) to 115000 in the serial tab of the Wiz program.

[It's Jafo]

JFI... the default port for the 110 board is 5000.... not that it matters as the port is the one you assign in "Network settings".

[bextexpex]

I did the following...

set port to 1920
and check serial speed 115200

and it works now like a charm..

thanks guys for all of your help..

[poroto40]

I did the following...

set port to 1920
and check serial speed 115200

and it works now like a charm..

thanks guys for all of your help..
that all it very simple mod