got 110 and 119 but no 129

[selkirkman]

110 1nd 119 scanned and play well. hd comes in good.Have 3 sats into powered 9x8 switch. 110 lnb1 power on .119 lnb1 power off.... 129 lnb2 power off.dreamlink scans and plays all 3 sats. jynx shows 129 as 119. suggestions regarding solution. thanks

[bkr™]

Definitely a set up issue. Most folks use 119 as diseqc 1, 110 as diseqc 2, 129 as diseqc 3 with no problems. perhaps you need to follow...however no one knows what dish or lnbs you are using.

[selkirkman]

setup works good on dreamlink.sats are set the same as dreamlink.elliptical dish.3 double standard lnbs. 9x8 powered switch set as above

[Terryl]

Why do you have the LNB's powered OFF on the 119 and 129 setups??

[selkirkman]

Why do you have the LNB's powered OFF on the 119 and 129 setups??

because that is the way the powered 9x8 switch says to set them up .lnb1. 110 22k 0n. 11922k off..lnb 2 91 22k 0n . .129 22k off.

[iq180]

110 1nd 119 scanned and play well. hd comes in good.Have 3 sats into powered 9x8 switch. 110 lnb1 power on .119 lnb1 power off.... 129 lnb2 power off.dreamlink scans and plays all 3 sats. jynx shows 129 as 119. suggestions regarding solution. thanks
what dish & lnb are you using, you should post this info when asking for help with any receiver.

[selkirkman]

what dish & lnb are you using, you should post this info when asking for help with any receiver.

3 posts above.