Truble with the new DL T5

[strunz]

I am stuck in re booting after installing the new file -T5 01 00 0911 p- probably something wrong with this file!! there someone who knows how to get out? please!!! thanks

[Anubis]

Don't think it's a file issue.
Have you tried unplugging the unit for a couple minutes then plugging back in?
Not saying it will work but worth a shot.

[strunz]

Don't think it's a file issue.
Have you tried unplugging the unit for a couple minutes then plugging back in?
Not saying it will work but worth a shot.

I have tried everything without success,....thanks.. but there should be some way to unlock it

[torpainter]

I have tried everything without success,....thanks.. but there should be some way to unlock it

disconnect your ethernet Does it still reboot?
power off and disconnect your sat cable, power on. Does it still reboot?

[ICEMAN]

since you have tried everything..I came across this that you might wanna try http://www.satfix.net/showthread.php?122047-Power-cycling-solution&p=874540#post874540
I know is a different type of receiver but is still a dreamlink,see if that works for you.skip the first part on section #4 about the factory file....it worth a try.just saying

[strunz]

disconnect your ethernet Does it still reboot?
power off and disconnect your sat cable, power on. Does it still reboot?

yes I've tried all this, but what I meant is that the receiver does not rebooting .. is stuck on ... boot error. Forgive me but I do a bit of effort to write English

[strunz]

since you have tried everything..I came across this that you might wanna try http://www.satfix.net/showthread.php?122047-Power-cycling-solution&p=874540#post874540
I know is a different type of receiver but is still a dreamlink,see if that works for you.skip the first part on section #4 about the factory file....it worth a try.just saying

I'll try to do this. THANKS....

[coyhunter]

i'll try to do this. Thanks....
how did you make out??????????/

[strunz]

how did you make out??????????/

Nothing to do ....I took it back to the dealer and they gave me a new one. now works fine. there is only one problem with these receivers... not enough power

[coyhunter]

connect anther stb receiver an old one,,,,,,,,,,,for additional power

[strunz]

connect anther stb receiver an old one,,,,,,,,,,,for additional power

how do you do this? explains it please?

[torpainter]

Nothing to do ....I took it back to the dealer and they gave me a new one. now works fine. there is only one problem with these receivers... not enough power

that depends on your set-up
Read post 8 here
http://www.satfix.net/showthread.php?141848-need-help-with-switches

[strunz]

that depends on your set-up
Read post 8 here
http://www.satfix.net/showthread.php?141848-need-help-with-switches

I have no problem with the signals ... my problem is ..... if I turn on the TV before the receiver ... the receiver will not turn on

[Anubis]

I have no problem with the signals ... my problem is ..... if I turn on the TV before the receiver ... the receiver will not turn on

Have you tried pushing the STB button on your remote after you push tv button to turn tv on??

Is your box plugged in to a dedicated plug in as in the wall or true power bar?

[pax]

Most likely dc on the modulator . Are you running the modulator (CH3/CH4) to the TV . IF so disconnect it and see if the DL turns on. I would doubt you are . In the old days some receiver needed to have a DC block installed in the RF Modulator line to isolate it.
Just a thought . Pax


Have you tried pushing the STB button on your remote after you push tv button to turn tv on??

Is your box plugged in to a dedicated plug in as in the wall or true power bar?

[strunz]

Dear gentlemen, I must apologize for not having explained well. What I meant is that when i turn on the TV before the receiver, the receiver remains stuck on booting and does not go anywhere then I have to turn off the TV and turn on the receiver first and after that it boots up ... thanks

[aidejr]

That is a very odd one. How are you hooking up the receiver to the TV. Can you try another hook up for a test..maybe component over the hdmi.

[strunz]

That is a very odd one. How are you hooking up the receiver to the TV. Can you try another hook up for a test..maybe component over the hdmi.

Thanks aidejr for reminding me
I had the same problem with another receiver so long ago it was (limesat hd) and it reminded me of the problem that the hdmi cable was interfering with the signals and with the tv so I changed to component cables and I solved the problem. but.... I wish someone would explain why these problems occur because sometimes we blame the receiver that does not work, but instead is the TV .... thanks to everyone for the support