Nimiq 82 not scanning [Archive] - satFIX.to - FTA Forum, Files, and Resources

View Full Version : Nimiq 82 not scanning

dcapper

10-05-2013, 10:52 PM

Anyone ever had a problem with getting Nimiq 82 to scan?

I have checked the lnb with my sub and it works. I tried different ports on the diseqc and all I get is 15 channels on the scan. Anyone have any troubles like that? I am using a diseqc for 119, 110, 91, 82 and a 22khz for 129. I have tried every combo and it still scans only 15 channels. Any ideas?

BanHammer

10-05-2013, 11:00 PM

30 of the 32 transponders on Nimiq 82 are Turbo 8PSK modulated, these may need to be updated in your Viewsat.

here's a list of transponders I found on another site

Nimiq 4 @ 82w

No Frequency Polarity S/R Modulation

01 12224 ... V ...... 21500 Turbo 8PSK
02 12239 ... H ...... 21500 Turbo 8PSK
03 12253 ... V ...... 21500 Turbo 8PSK
04 12268 ... H ...... 21500 Turbo 8PSK
05 12282 ... V ...... 21500 Turbo 8PSK
06 12297 ... H ...... 21500 Turbo 8PSK
07 12311 ... V ...... 21500 Turbo 8PSK
08 12326 ... H ...... 21500 Turbo 8PSK
09 12341 ... V ...... 21500 Turbo 8PSK
10 12355 ... H ...... 21500 Turbo 8PSK
11 12370 ... V ...... 21500 Turbo 8PSK
12 12384 ... H ...... 21500 Turbo 8PSK
13 12399 ... V ...... 21500 Turbo 8PSK
14 12414 ... H ...... 21500 Turbo 8PSK
15 12428 ... V ...... 20000 DVB-S
16 12443 ... H ...... 20000 DVB-S
17 12457 ... V ...... 21500 Turbo 8PSK
18 12472 ... H ...... 21500 Turbo 8PSK
19 12486 ... V ...... 21500 Turbo 8PSK
20 12501 ... H ...... 21500 Turbo 8PSK
21 12516 ... V ...... 21500 Turbo 8PSK
22 12530 ... H ...... 21500 Turbo 8PSK
23 12545 ... V ...... 21500 Turbo 8PSK
24 12559 ... H ...... 21500 Turbo 8PSK
25 12574 ... V ...... 21500 Turbo 8PSK
26 12588 ... H ...... 21500 Turbo 8PSK
27 12603 ... V ...... 21500 Turbo 8PSK
28 12618 ... H ...... 21500 Turbo 8PSK
29 12632 ... V ...... 21500 Turbo 8PSK
30 12647 ... H ...... 21500 Turbo 8PSK
31 12661 ... V ...... 21500 Turbo 8PSK
32 12676 ... H ...... 21500 Turbo 8PSK

dcapper

10-05-2013, 11:11 PM

Thanks after remember what I did on the Dish HD's that created a sticky, I just redid all my sats on Bev.

BanHammer

10-05-2013, 11:17 PM

Thanks after remember what I did on the Dish HD's that created a sticky, I just redid all my sats on Bev.

plenty of hockey tonight! gotta love having NHL Center Ice

dcapper

10-05-2013, 11:34 PM

Hehe. Mods should make the post a sticky too.

dcapper

10-05-2013, 11:40 PM

So I got all the channels to scan now but I cannot get picture on a lot of channels. Get the audio but no picture. Any ideas on this?

Terryl

10-06-2013, 12:26 AM

dcapper

10-06-2013, 12:34 AM

I'm trying to watch TSN HD 2850. But 2801 Global HD is working.

dishuser

10-06-2013, 12:36 AM

So I got all the channels to scan now but I cannot get picture on a lot of channels. Get the audio but no picture. Any ideas on this?
maybe the server your on don't carry them

BanHammer

10-06-2013, 03:59 PM

I'm trying to watch TSN HD 2850. But 2801 Global HD is working.

TSN HD is also on channel 3400.

blackwater

10-07-2013, 09:08 PM

Most of the transponders below 12457 are spotbeams, so you will not be getting those.

Audio but no picture looks like a software or IKS server problem.

Look at lyngsat.com for a transponder list for 129W.

I'm assuming you're meaning 129 for spotbeams as 82 (and BEV in general) doesn't do spots. The footprints for 82 are quite tight however, so many people in the US can't see the signal since the satellite was replaced.
Audio on 82 is in the clear so anyone can hear the channels. If there's no picture, the signal is still scrambled. From what I can gather, BEV channels are still sporadic on several of the iks systems so what's available comes and goes on a daily basis, with many channels unavailable.

NewtoIKS

11-06-2013, 05:15 PM

im also stuck finding 15 channels on nimiq 82 and they don't even look like Canadian channels. I have a linkbox 8000 hd local and have bev 91 with 549 channels and bev 82 with 15 channels. how do I get my linkbox to work with 82

airjam

11-07-2013, 01:37 AM