max signal

[fred1438]

is it just my receiver or do others max out at 85% got 110cm on 110 and a 140cm on 119 and they both max at 85%

[Terryl]

"S" or "Q"?

If it's the "S" then that's the signal strength from the LNB to the receiver, type and length of coax used, plus any other stuff (ground block, coupler, switch(s)) will affect this signal.

If it's the "Q" then thats the quality of the decoded channel from the satellites transponder, the "Q" is a measurement of how much data is being corrected by the FEC codes due to noise in the signals.

[fred1438]

i was just asking cause 82/91/110/119 i get 85%S 82%Q with or without the diseqc
and with the 4 foot i tried on each so was wondering if its just my receiver that this
is happening to??

[steven charles]

i was just asking cause 82/91/110/119 i get 85%S 82%Q with or without the diseqc
and with the 4 foot i tried on each so was wondering if its just my receiver that this
is happening to??friend it also depends on your location if your to far thats probably the highes s/q you,ll get with that size of dish....

[Fastcompany]

85% Q is the maximum reading you will get with any Jynxbox receiver. Hook up another receiver to the same cable and it will read 95% or greater. Just a quirk with them. On the other end, none or poor Q will show as 42%