2 Nfusion pheonix setup help

[jaycafe]

I have NOI running fine (131a, also tried 131), receiver #1 has been working for months and wanted to setup receiver #2 in bedroom. Dual lnbs used, cables running to appropriate receivers. Receivers are identical.
Only receiver #1 will show picture,works perfect, #2 will not, although will do a guide update. I have proper $ for 2 receivers, used advanced settings in NOI setup. #2 just will not connect.
Does someone have a setup guide? Is it ip related perhaps? Thx.

[lyman zerga]

Use IKS4SUNS, you need to identify the individual
ips of the stbs, NOI is not capable of multiples.
Last I noticed v 1.6 was kicking around.

[riverman]

Use IKS4SUNS, you need to identify the individual
ips of the stbs, NOI is not capable of multiples.
Last I noticed v 1.6 was kicking around.

NO1 131a is certainly capable of running multiples. I run up to 4 . Just need to have codes entered for each receiver. Do you have the 255. file in each receiver

[jaycafe]

NO1 131a is certainly capable of running multiples. I run up to 4 . Just need to have codes entered for each receiver. Do you have the 255. file in each receiver

I thought noi would work. Tried the suns, no go for #2, #1 still working. They both have the 255 file. I'm going to check my router next, I couldn't access it, that could be a solution (or a new problem). I'll update my findings.

[Glatt]

Re-check your numbers in #2 or put them in first settings to see if all is working!

[gwrowe]

Did you change network settings in receiver to static and change the gateway to your comp. IP?