no signal 5 min later..

[silvia]

I start the box..to setup the antenna.. I got signal and 5 min later... no signal at all... I use 82-91 110-119 with emp-centauri! help!!

[benfica]

Well was a setting change u did ?
Were in a p$ ? Cause public is fine here, maybe was ur private ...

[silvia]

both work great 82-91 with sw-21...110-119... I try to connect the 4 lnbs with a brand new switch and.. he do that!! :S

[benfica]

Lets not forget when seting up ur switch u have to use a,b,c,d
Go on diseq parameter and add ur info a=1 b=2 c=3 d=4
Hope that helps....

[scooby8888]

i lose signal once in a while out of the blue myself. I lost the 119 last night on one tp, now I don't know if they ended up FINDING BIGFOOT :)

[joshua124]

on my pinwheel everytime i make any changes to the lnb or switch settings I have to hard reboot box by pulling the power cord for a few seconds n plugging it back in. if I dont do this it wont send power to the coax until I do. I have to do it everytime I make any change to the sat settings

[silvia]

All setting ia correct! I have signal on 91 and when I scan.. They found nothing and he be back with no signal ! Thx Joshua I trier but still same here :(

[benfica]

Maybe a bad switch ?
gotta trouble shout as much as u can...
From lnb, net, to a simple connector ...

[Nostradamus]

All setting ia correct! I have signal on 91 and when I scan.. They found nothing and he be back with no signal ! Thx Joshua I trier but still same here :(
are yu gettingf a lock on 91 before you scan? sounds like you atre hitting the wrong sat

[silvia]

Yes I'm locked to 91 and 110 but with sw-21 I'm lock 82-91 or 110-119 but with thé diseqc 4x1 i'm only lock 91 ans 110 ans when I scan...they detect nothing! :S

[whoknows]

Yes I'm locked to 91 and 110 but with sw-21 I'm lock 82-91 or 110-119 but with thé diseqc 4x1 i'm only lock 91 ans 110 ans when I scan...they detect nothing! :S


Some of those cheap disq switches don't work well. Get a chieta or zinwell and you should be good. Make sure box is unplugged when making coax connections to switch. good luck

[silvia]

I plug directly each lnb with an union and I have signal only on 91 and 110... My cable is new..connector etc