beaver south ip 103.31.187.113

[thebeav]

try this new ip for beaver south if it works good north will fallow

please keep thread clean just works or dont so i can see if i should move north there aswell or not

103.31.187.113 for beavertv south

[dishuser]

worx with dlhd at my bro's

[thebeav]

do not pm me for renewals im not renewing or taking any new till this is resolved hopefully this fixes it all

[snafued38]

worked:thumbsup: dl t4

[dooly]

Works LS Air

FYI Beav 5. worked for me Friday morning was away for weekend with receiver off came home would not connect again with 5. or the other new ip on north or south

[granpaw]

works 100% after reboot:bump:PW iptv

[lionking]

Yes it works and connected now.

[thebeav]

103.31.187.113 is only ip active for beaver south right now all others shut off now

[DerZ]

Thanks for the update Beav.. 5. IP was flawless for me until about 10 mins ago, just updated to the new one and instantly back in action. TY

[TJCams]

Switched to new south ip - works fine - didn't even need a hard boot.

[haha11]

went down right now on north with 190 ip..
so i tried this new 103 ip on North and working all good :)
thanks!!!

[thebeav]

103.31.187.113 for beaver north and south now


if any Mod/Admin reads this can you please change the title to
beaver north & south ip 103.31.187.113

would be greatly appreciated

[Scottyb77]

I was bored so I inputed this info for North with a Jynxbox V2 just to get ready to test it when its ready and it instantly connected hadnt even rebooted my system Beav I think your making great progress keep it up man Jynxbox Ultra Lite just comfirmed also working instantly connected

[ernie1946]

got connected to new IP 103. for north 1st try Great Job beav thanks

[Ramjet13]

Now connected on beaver north on 103 Thanks

[Choicedelight]

Tried new ip and still can't connect. Reset box, modem, and router. Using ILink 210.

[crackerrog]

Thanks Beav, up on the jynxbox V2 now...


103.31.187.113 is only ip active for beaver south right now all others shut off now

[turbor]

tried new ip and still cant connect either, resseted everything also, viewsat, north pound

[dudu23]

Thank You !! Connected in second !

[pete1970]

cant connect on 103 rebooted router etc still nothing

[kenkell1]

New IP workin fine at my sisters house on her Viewsat Max

[MaFiA]

working here on nfhd

[KIDWCKED]

it might take a minute to connect...new ip working great beav......awsome job man....:cheers2:

[beambeam]

103 on dlt5 works for north.


thank you

[johnny cash]

103.31.187.113 confirm working for both South and North. Resolves connection issue. As KIDWCKED stated it may take a minute or so to connect. Excellent job thebeav and the beaver team......Cheers!!!!!!

[holly2012]

Working Great on N and S Nice Job Beav, You Da Man!!!!!!!!!

[dodgemall]

Working on south with jynxbox ultra v2 , thanks beav.

[rig3]

got connected to 103 with limesat thanks team beaver

[turbor]

im running xx-client 1.14 with a wire, so no router here to reboot, its been trying to connect for more than 30minutes now without success. north-viewsat

[patsfan87]

Thumbs up...JBV3 on N

[chanh]

lime ultra 103 up merci beaver,north

[68corvette]

103.31.187.113 works great for me on south pond :) beavertv are the best

[helsan]

By the way Thanks for the great work and communication.

[blancal]

works:yeaah:ks

[freekazoid]

What port is everyone using? I can't connect to the new 103.

[thebeav]

north 25658 south 33666 ip 103.31.187.113 this is for beaver north and south only

[jaybird1]

up on north. DL HD

[crazy carl]

Everything slicker then snot on a door knob

[turbor]

im in also, i had my port info wrong, i must have made a mistake when i first changed the ip couple of days ago, thanks for the good work, beav :)

[bbaallddyy]

No connection here on north with 103

[Choicedelight]

:noidea:3 hours later.... Still can't connect lol ugh :noidea:

[bbaallddyy]

Duh reboot reciever and all is good on 103

[snafued38]

rekick,reboot triple check info:yeaah:

[pellmaster]

Good job beav everything works great here. Thanks again beav

[thepro111]

103 works great but only after I adjusted my virus scanners and malwarebytes(especially this one) antimalware. F.Y.I.

[publicsd]

It it wasn't of the snow I'd have hijacked the cable in the pole this afternoon. Thanks beaver for the quick turnaround. I won't have to do that tomorrow. Now everything's up and I'll bathe in the huge amount of channels.

[mikmouse]

great job as always thebeav team,up on north with 103 with multi recievers

[Choicedelight]

So I checked the settings regarding my firewall, did a reset on receiver, router, and modem; double checked my network info, even did a factory reset and I'm still not receiving a connection....

[thebeav]

pm me your username and ill check account

[StreetGlaide]

Hmmm I was workiing good last night on both north and south with 103 ip, got up this morning and wont connect to server on on both. back to square one. :grr:

[rhsalt54]

tried rebooting everything and still not connecting on north

[ruthie]

Still some bugs to work out as always with a switch......server is working on it will be posted when both north and south up again.

sorry for inconvenience.


Beaver Crew

[willydilly]

It it wasn't of the snow I'd have hijacked the cable in the pole this afternoon. Thanks beaver for the quick turnaround. I won't have to do that tomorrow. Now everything's up and I'll bathe in the huge amount of channels.

Get up the pole and do your magic anyway. Always a good thing to have backup even if you're not using it.

[21chip]

JynxBox v2 not connecting to server. The port is still the same? It was working when it was called Beav. When i Changed from the name beav to ip number 103... would not connect. Went back to name and it will not work. what did i do wrong there?

[jos25]

probably nothing, read Ruthie's post above @52

[TJCams]

They are still working on it. As of this morning I had nothing on south, and audio only on north.

[DerZ]

Same here, All was working great last night, but this morning everything is black with 'Failed to connect' when attempting to connect to any of BTV server ips. Ill keep an eye out here for an update throughout the day.

[bmichel544]

whase working last knight on 103. down this morning

[Choicedelight]

JynxBox v2 not connecting to server. The port is still the same? It was working when it was called Beav. When i Changed from the name beav to ip number 103... would not connect. Went back to name and it will not work. what did i do wrong there?

Same here.

[wirefox]

Read post 52

[ultra007007]

is you yearly dn working right now firefox

[wirefox]

No just networks 8100-8103

[dishuser]

is you yearly dn working right now firefox


No just networks 8100-8103read first post

[turiddu]

I changed the new ip and does not work what should I do?

[saggy]

read post 52

[ernie1946]

I'm back UP on ip 103 on north

[thebeav]

sorry about downtime this am and early afternoon that was my fault i forgot to set something on server all should be back up now

been a long couple days and i forgot to set a simple comand when i changed stuff yesterday sorry

[bliz]

I can NOT connect to the server at
103.31.187.113

help?

[jos25]

unable to connect server at 103.31.187.113 says failed to connect to card server. did reboot, rescan, reset everything. will not make connection. any ideas.

[thebeav]

103.31.187.113 is only for beaver north and south

do not change yearly or frost servers they are difrent servers

if your on beaver north or south and have changed the ip and have rebooted everything pm reseller to check exspiery date

[jos25]

back up and running, figured it out. my anti malware anti virus software was blocking connection. changed settings and now all is good.

[whoknows]

is you yearly dn working right now firefox


Yes there has been no interruption with yearly and no changes in domain.

[freekazoid]

I am also now connected. As stated above it was my malwarebytes firewall blocking the IP.

[dishuser]

Yes there has been no interruption with yearly and no changes in domain.
read first post

[bigbadbrother]

103.31.187.113 is working in the south

[nahida]

New ip works great, did not have to reboot. Simply changed the server ip. Thanks