Fustrated with xfta setup

[fickyoi]

I am running a VS maxHD / XFTA router wired to my main router with a valid donation.. I have access to the internet through the X-fta, have triple checked my donation and settings.. Here is the error I continue to get

Trying: newcamd://XXXXXXXXX:[email protected] ...
Trying: newcamd://XXXXXXXXX:[email protected] ...
Trying: newcamd://XXXXXXXXX:[email protected] ...


Failed to reconnect to card server.




Can anyone help?

[magnus]

Stop and restart the rq-sssp service or unplug and replug in your xfta after about 20sec. Usually gets like that if you are on a unsupported channel for more then 20 sec or so. If that doesnt work try killing power to your internet router and vs for about 20sec each to get everything rebooted. If all that fails make sure you are on a supported channel or check to see if donation is down.

[fickyoi]

I've tried all that already (and again today) - no change.

[freeatlast28]

use the techno flash with xxclient works 10 times better and you dont have to reboot xfta 1 million times

[magnus]

Recheck your deskey. Pretty tricky with rocket. Screwed up the last few numbers before. 12134 (not 1234). Make sure no spaces on any of entrys (before or after names/numbers). And case sensitive.

[edrik]

do what magnus says, that bit me in the arse once. i had a space after my password in the xfta

[magnus]

use the techno flash with xxclient works 10 times better and you dont have to reboot xfta 1 million times

Is techno flash the new xfta software? If so, i asked in the vs/xfta section what advantage there is over original but did not get a response. Does it really fix the constant rebooting problem? Sorry if i am hijacking this thread but it seems revelant.