connecting two dishes

[papito]

Can anybody explain how to connect dish 1000.2(110,119,and 129)with dish 500(82,And 91)with twin dish pro LNB for 3 receivers.I'll appreciate any help.Thanks.

[Terryl]

Well it's a tough job to do for 3 receivers when using Dish equipment.

Dish equipment was never designed for 5 satellites as they don't have the need to do so.

Some have tried using a DPP44 switch at both ends then 22 KHz switches to go between the two systems.

It would switch something like this.

Diseqc #1 = 119W, 22 KHz off.
Diseqc #2 = 110W, 22 KHz off.
Diseqc #3 = 129W, 22 KHz off.
Diseqc #1 = 91W, 22 KHz on.
Diseqc #2 = 82W, 22 KHz on.


Some have got it to work and some have lost a lot of hair and developed a serious drinking problem while staring out into space from the roof.

[coyhunter]

well it's a tough job to do for 3 receivers when using dish equipment.

Dish equipment was never designed for 5 satellites as they don't have the need to do so.

Some have tried using a dpp44 switch at both ends then 22 khz switches to go between the two systems.

It would switch something like this.

Diseqc #1 = 119w, 22 khz off.
Diseqc #2 = 110w, 22 khz off.
Diseqc #3 = 129w, 22 khz off.
Diseqc #1 = 91w, 22 khz on.
Diseqc #2 = 82w, 22 khz on.


Some have got it to work and some have lost a lot of hair and developed a serious drinking problem while staring out into space from the roof.
i started a thread same problem...............but only 2 recievers.............any help would appreciated