PDA

View Full Version : help with sV360 P and using emp centauri 9x4 multiswitch



bextexpex
12-04-2013, 06:01 AM
I have 3 dishes pointing to 110, 119, and 91.
I have 4 sonic view 360P receivers.
I have 3 dual, circular ku band LNBs - CALamp brand

please let me now which dish is connected to what port on the 9 x 4 eagle aspen multiswitch and what is the diseqc number for each dish ?
is it mandatory to have the sw21 switch ON in the SV360 P receiver ? and if yes, for which satellite ?

also, my LNB to receiver will be about 160 to 200 feet apart.. will this affect the performance of the emp centuari 9 x 4 multiswitch, even though I am using rg6-quad coax ?

also, are there any problems with the emp centauri 9x4 with missing channels during the scanning process, when compared to not using the emp centauri 9 x 4 switch ?

Sp0iler
12-04-2013, 10:31 AM
Your diseqc settings will match how ever you land them on the switch.
Your run of 160-200' is excessive for the 360 and may require additional power to run the lnb's and switch.
I don't think you'll need the sw21 on. Just run like a normal diseqc switch.