new pinwheel hd channels

[tbird686]

hey there my friend just got the new pinwheel mini............he was saying the sd channels work great but he is noticing the hd channels well on bev 82 are not smooth (using beaver tv and its always rock solid).......they come in but are choppy not scrambled..........like they never did that with his nfusion..........could there be something wrong with the hd thing or tuner?

or is there a setting?................will try the dish hd later.....


just checked the s and q are both 95 on the set up

[granpaw]

I would try unplugging the box for 30 sec and see if that clears it up. Check the hd board connections carefully with all powered down.

[tbird686]

still doing it

[granpaw]

Maybe if not to difficult to point the dish over to 110w and see how it looks there. Hope it's not your hd board, GL

[sg2100]

What tuner card does he have ?.. I had 2 of the ls400,s do the same , I decided to get 2 ls500,s and initially the box needed a warm up period of about 5 min before the pic became smooth or watchable . also check to make sure the module is seated securely .

[brofro80]

are u using hdmi cable?

[tbird686]

yes to the hdmi cable.......its the ls 400


we locked in 82 91 110......were having a hard time getting 119 and 129........using a motor......it does not look like it lets us manually move it to adjust.........


but okay......whats an hd channel on 110.....ill try it.


edit

seams to be less choppy maybe the warming up is it..........do you leave the box on all the time?

[BanHammer]

yes to the hdmi cable.......its the ls 400


we locked in 82 91 110......were having a hard time getting 119 and 129........using a motor......it does not look like it lets us manually move it to adjust.........


but okay......whats an hd channel on 110.....ill try it.


edit

seams to be less choppy maybe the warming up is it..........do you leave the box on all the time?

9421 is an open one. Since it's not encrypted, if it chops up you'll know it's the receiver

[tbird686]

well were trying this................i noticed NOI was still running on the lap top.....lol just turned it off

[tbird686]

choppy on 110 hd too

[holly2012]

Did you try a deep standby to see if that will fix it if not try a factory default and what file are you using

[tbird686]

left the unit on all night.......just switched to a channel on 82.....still doing it.....ill try the factory file later today.......can you edit channels?

and the 2.9 file

[tbird686]

So if its a bad ls 400 does leesat warrenty that .....lol


Whats the difference with the ls 500.....it woukd suck to pay 200 for a box then have to replace the hd card when its all new......

[sg2100]

So if its a bad ls 400 does leesat warrenty that .....lol


Whats the difference with the ls 500.....it woukd suck to pay 200 for a box then have to replace the hd card when its all new......

The Ls 500 is similar to the ls400 , all that is noticable is that the board is blue . some people like myself has had better luck with them . the board sells for around 45 i believe. but check your seller and see if he will swap out your card first .Leesat is usually quite good with replacing that as long as you contact him and explain your issue .

[zhong]

He usually tests it out before he sends it, so should be o.k..
Unless it gets damaged in the mail or something.



So if its a bad ls 400 does leesat warrenty that .....lol


Whats the difference with the ls 500.....it woukd suck to pay 200 for a box then have to replace the hd card when its all new......

[blacklistedcard]

That's the first time I have heard of this problem. l would love to see a video of the choppiness.

[tbird686]

can we upload videos?

its like the hd card just can't keep up......i'll be watching it over the next while and see how it goes.....