PDA

View Full Version : How well does Nfusion HD work with BEV or a combo of DN and BEV


jabroni
12-15-2013, 03:56 PM
Delete Thread
Glatt
12-15-2013, 05:02 PM
Been doing that for at least 2 years no problem what so ever!
Dish gets 7 day guide if in setting you put it to 5 days! do not know why that works!
The Bev guide only goes for hours!
jabroni
12-15-2013, 05:34 PM
Delete Thread
jabroni
12-15-2013, 08:30 PM
Delete Thread
Glatt
12-16-2013, 04:19 PM
The problem with getting Hor might be
1. The length to receiver
2. The diseqc
3. The LNB
In that order!
I get all 5 lnb's with Sw21 switch 91. 82 to port 4
jabroni
12-16-2013, 04:36 PM
Delete Thread
Glatt
12-16-2013, 05:20 PM
I have been running this setup for 10 years20331
jabroni
12-17-2013, 05:27 PM
Delete Thread
henpecked
12-17-2013, 05:38 PM
Most times bad connector at the end of cable...in your case..change connectors at both ends going into 91




Glatt - where you successful in getting 91/82 with your NFHD? What type of setup did you use (original bell with SW44) or something else?

I cannot get any quality on the horizontals on 91. 82 seems to get everything.
jabroni
12-17-2013, 06:22 PM
Delete Thread
henpecked
12-17-2013, 07:43 PM
I can confirm that Nfusion HD works well with Legacy LNB's running through a DiSEqc switch
110, 119, 129 and Bev 82....using a router with goo s/w..
I have witnessed this personally....Guaranteed


henpecked - did you see the part that I wrote above about the weird fact that this setup works with bell subbed receivers, nanosat, viewsat 9000 HD. I think the conclusion we all came to is that NFHD does not like legacy equipment. If I want to bother with BEV and the NFHD, I would need to either add another dish (no going to happen), or add 91/82 to my elliptical (probably slim chance of getting a signal. I wonder if the dreamlink t5 works with legacy bell installation.
Glatt
12-18-2013, 12:55 AM
Jabroni I get 99% on all except get 63% on 118.8
The brackets are mine because of the bracket that you mentioned!
PM me for info!
rockisdead
12-20-2013, 02:54 AM
Been doing that for at least 2 years no problem what so ever!
Dish gets 7 day guide if in setting you put it to 5 days! do not know why that works!
The Bev guide only goes for hours!

How can you get both epg,if I hook up with dish and bev,mess up the channels,for example,cannot go 9611 with my remote,have to power off and on,when update epg,one overwrite the other,is there any trick?thanks.