Fail to Upload

[romanb]

okay i have read a lot and tried a lot of things but its been of no help
my ihub is stuck at version 82.9. I have been trying to upload svlan v43 using wiznet but every time I try to load it the "fail to upload message" comes up.

[Sp0iler]

Not sure of your windows version but try this:
Make sure your hardwired from your lan port...

Right click on the Network icon on your desktop and chose "properties".
Choose "change adapter settings".
Double click on "local area connection".
Locate "Internet Protocol Version 4 (TCP/IPv4)" and double click on it.
Choose "Use the following ip address"
For "IP address", enter your default gateway but make the last number .15 (ex:192.168.0.15)
"Subnet mask" is the usual 255.255.255.0
"Default gateway" is your default gateway... duh...(ex:192.168.0.1)
Dont worry about entering anything for "DNS server" and click "ok" to exit out.
Try again to load the file.
Post your results.

Good luck,
Sp0iler

[romanb]

I tried this.. but it doesnt work
A box comes which says-
The destination: 192.168.0.15 is unreachable.
Please check if the device is in the same subnet with the PC!

[Sp0iler]

What is your default gateway ip ?
The ip's we use here are not ones you need to worry about hiding.
Feel free to post all ip's.

[joefish]

Would prolly also help if you post what operating system on PC.