NO epg on nano

[Sarangi]

Having read other treads regarding this problem not sure if there is a fix or not. I get no epg for 110,118 or 119.
Have loaded 810 .
Loader ver. 2.0
See Code ver. 7.18
TP Data 1.1.4
Any help for this issue?

[PremiereElite]

Having read other treads regarding this problem not sure if there is a fix or not. I get no epg for 110,118 or 119.
Have loaded 810 .
Loader ver. 2.0
See Code ver. 7.18
TP Data 1.1.4
Any help for this issue?
Is this Nano HD ? Did you select ALL CODE + BOOT CODE? What are your LNB And Switch settings?

[Sarangi]

Is this Nano HD ? Did you select ALL CODE + BOOT CODE? What are your LNB And Switch settings?

Thank you your reply. I could not remember if I chose ALL CODE + BOOT CODE so I have reloaded the box and now in the process of scanning the sats. Yes it is a nano hd. Will let you know how it fares.Thanks again.

[Sarangi]

I have scanned 119w with same results. Did not do 118w or 110w. Takes a long time.
Sttings are:
110w
Disqc port 2
TP Freq. 12224
Lnb 11250
Lnb Pwr Off

118w
Disqc Port 3
TP Freq. 11715
Lnb 10750
Lnb Pwr Off

119w
Disqc Port 3
TP Freq 12297
Lnb 10750
Lnb Pwr Off

Hope this helps. I have since downloaded the file again and reloading the box. Blind Scanning in progress again. Hope it works.
Thank you

[PremiereElite]

I have scanned 119w with same results. Did not do 118w or 110w. Takes a long time.
Sttings are:
110w
Disqc port 2
TP Freq. 12224
Lnb 11250
Lnb Pwr Off

118w
Disqc Port 3
TP Freq. 11715
Lnb 10750
Lnb Pwr Off

119w
Disqc Port 3
TP Freq 12297
Lnb 10750
Lnb Pwr Off

Hope this helps. I have since downloaded the file again and reloading the box. Blind Scanning in progress again. Hope it works.
Thank you
My friend the LNB power have to be ON..

[Sarangi]

Sorry. My mistake. Lnb pwr is on it is the 22k option that is off. Again. Sorry. I have since blind scanned 110w and still getting only channel #`s and no epg even after pressing Fav button and okaying.

[PremiereElite]

Sorry. My mistake. Lnb pwr is on it is the 22k option that is off. Again. Sorry. I have since blind scanned 110w and still getting only channel #`s and no epg even after pressing Fav button and okaying.

What type of dish are you using? Because you posted that you are using LNB 10750 AND 11250..

[Sarangi]

Not sure of that but I have one dish with dual lnb that pulls in 118 & 119 and I have another one for 110. As for make and model I have no idea. I was pulling in epg before this latest file but not very reliable. Thank you for your reply.

[Sarangi]

Thank you to all that replied to this trouble I was having Seems it was the box itself causing issue. I had it replaced and the new one is working just fine. Thanks again.

[gnosis]

I am having the same issue. Ive factory bin, factory reset, 810 bin All code+boot, factory reset, set up sats and scanned. Tried this three times now. Pretty sure my settings are right. Standard dual lnbs and diseqc switch.

No EPG and SID.

Any suggestions ?

[jazzman]

I am having the same issue. Ive factory bin, factory reset, 810 bin All code+boot, factory reset, set up sats and scanned. Tried this three times now. Pretty sure my settings are right. Standard dual lnbs and diseqc switch.

No EPG and SID.

Any suggestions ?

Best bet is to start your own thread about this instead of hi-jacking an older one. You'll get better results that way...your choice.

[gnosis]

OK faulty diseqc switch. Replaced diseqc switch, factory bin, factory reset, 8.10 bin all code + boot code, updated setting and rescaned satellites. All good now