need help with setup on new sonicview 360 premier

[crazymexkian]

Can someone please help me out. I just bought a sonicview 360 premier and wiz110sr. Never been used. can someone please tell me what files I need. which file do I load on 360 first and so on. Thanks

[Sp0iler]

To set up the dongle (Wiz110sr board):

C/P
1-Using the Wiz program... upload the Svlan 4.12FW file.
http://www.satfix.net/attachment.php?attachmentid=18660&d=1371159557
2-In the Wiz program, click on the "Serial" tab. Change the baud rate (speed) to 115200 and click on the "settings" to save the change.
3-Load the "nochk" Emulator file for your box to the box. (See the file below)
4-Reconnect the 110 board as usual and reboot the box.
5-You should see the "Network adapter connected" message and you should have "Network settings" in your menu.
6-Confirm the info or load the server info if needed and try to connect.

If all has gone well, you should run like any other dongle for SV.
End C/P

To set up the box, load this current file for the 110 board:
http://www.satfix.net/attachment.php?attachmentid=18470&d=1369717012

After that, you can scan your sats or load this file for the 110/119:
http://www.satfix.net/attachment.php?attachmentid=20826&d=1391855796

Let us know how you make out and Good luck,
Sp0iler

[crazymexkian]

thanks for info but I can't get network settings to appear on sonicview 360 p. I download wiz program it recognizes hub version 4.12 loaded hd 20-2028 nochk did reboot and doesn't detect network adapter or network setting don't appear. what did I do wrong. can some one please help me thanks

[Sp0iler]

Did you change the baud rate (speed) to 115200 ?
If the dongle is not seen on the network or by the box, Network settings will not show.

[bearbait]

I hate when people don't come back to say thanks or tell you that they got it working

[crazymexkian]

everything ok sp0iler thanks for all your help