limesat hd air and diseqc switch

[chevy222]

hello

I have some probleme whit my limesat hd air

Im try to run 3 birds whit a diseqc switch 119 and 110 and 91

the probleme I have I have try 3 different diseqc chieta etc... same probleme all time.. all is configured correctly 119 on port diseqc 1 110 on port 2 and 91 on port 3 im see all bird but the diseqc dont whant switch if im stay to the channel ex on 119 all run fine im switch to channel on 110 the picture stay black the switch dont whant switch...

the only way to run this is whit sw21 switch and im lost 1 bird...

I have this probleme beceause I dont have a power inserter ??

This setup have 1 coax to the house its for what im prefered this setup ..I dont whant make a another hole to the house for the power inserter...... its crasy if im need a power inserter for run 3 birds whit a diseqc switch...


I have a old limesat ultra v2 , sonicview premier and db500s and in the past its work fine whit this setup


by the way im run a old LNBF circular

im need some help pls

[Anubis]

Are you sure all 3 lnbs are working properly and one isn't bad? Have you tried switching out the lnb's using a sw21 to make sure that they all work.

You may want to try factory defaulting your unit and starting fresh. Sometimes the units get loaded with info and won't work properly.

[greeny]

does dishpro work on LImsat since dish pro have switch built in