dual LNB bracket

[Isaak]

I have a dual yoke that was given to me, it has the D ends to hold the LNB's but square end that go onto the dish.

Unfortunately the dish end is also D shaped (made for a single LNB)... what do I do about this? I have tried to look at ebay and other sites but i cannot find a fix for this issue.

I am obviously doing something wrong.

BTW, it is a BEV/DISH Canada dish, not sure on size, not the smaller kind.

[Isaak]

I see they sell brackets........... duh

[fn59]

No point trying to put it on that dish, the y yoke is for a skewable dish.

[Isaak]

really.

what is the best way to receive 81/92? I see LeeSat has a dish/lnb combo.

[fn59]

A dish 500 is designed for that purpose. Lnb and switch would depend on how many other sats you're trying to get.
You could also use an 18" dish with one lnb in the arm and strap second lnb to the first with cable ties and silicone. But it would be harder with bell/dish lnb's with the d ends.

[iq180]

really.

what is the best way to receive 81/92? I see LeeSat has a dish/lnb combo.
A dish 500 will work fine but the dish pro or pro plus lnb is a power hog, what I use is a dish 500 with 2 single dish LNBs, they
will work on the dish 500 bracket, you will need an in line switch.

[Isaak]

The larger dish I have is 26" x 24" almost oval sort of size... "ExpressVU DishNetwork Canada" stamped on it, receives signals just fine.

The smaller dish I have is a factory ExpressVU type.

The LNB's I have are dual output D shape.

I apologize about not knowing more about what I have...