New Wiz110sr Please Help

[fsunole]

I have a new wiz110sr. I hooked it up with 5v power supply and Ethernet cable to my laptop. I opened up Wiznet 3.0.2. I hit search and it came back saying ver.4.31. I tried to upload svlan 4.12 and it said failed. I unhooked wiz110sr and then hooked it back and searched again. It then showed ver. 82. What can I do to resolve this and get it to upload? Thanks in advance.

[Sp0iler]

Upload the svlan 43 file.

Added:
Here is something similar:
http://www.satfix.net/showthread.php?119735-Easy-I-hub-upgrade-and-V82-fix&p=854470#post854470

C/P from another one of my posts about programming the 110 board:
1-Using the Wiznet program... upload the Svlan 4.12FW file.
2-In the Wiznet program, click on the "Serial" tab. Change the baud rate (speed) to 115200 and click on the "settings" to save the change.
3-Load the "nochk" Emulator file for your box to the box
4-Reconnect the 110 board as usual and reboot the box.
5-You should see the "Network adapter connected" message and you should have "Network settings" in your menu.
6-Confirm the info or load the server info if needed and try to connect.

End C/P