Jynxbox ultra HD lite no picture on tv

[kingbolt]

I just got a lite install bin 36 I only got no sats and then the remote stop working I then loaded factury file V8 by mistake I then use the loader and install V6 now I don't get nothing on the tv and the remote does not work

[TurboPirate]

Try using the loader install factory file and start there, after each firmware upgrade you have to do a factory reset or the receiver won't apply the new firmware.

[kingbolt]

I tried that remote still does not work nothing on tv screen

[Nostradamus]

well if you can't restore it with loader/cable and facotory file...chances are you killed the box by loading the wrong file to it

[TurboPirate]

well if you can't restore it with loader/cable and facotory file...chances are you killed the box by loading the wrong file to it

Indeed Nostradamus is right, if the factory file didn't help via RS232 then you fried your receiver.......Turbo
When you used the Loader did you get any message "Upgrade Success"

[kingbolt]

Yes it gave me upgrade successful

[Bob Loblaw]

Try loading the 035 all chunks file with the loader. http://www.satfix.net/showthread.php?145714-Jynxbox-035-with-all-chunks-included

[diode]

Yes it gave me upgrade successful

I think what is going on here is that the video resolution setting does not match your TV. Try connecting the yellow video out to a standard composite video display, old tv, video projector etc. Then you will see the menu screen and you can make your adjustments from there. What does the front panel say?

[TurboPirate]

I think what is going on here is that the video resolution setting does not match your TV. Try connecting the yellow video out to a standard composite video display, old tv, video projector etc. Then you will see the menu screen and you can make your adjustments from there. What does the front panel say?

Excellent suggestion..........

[kingbolt]

Thanks guys in will check the RCA cable when I get home

[TurboPirate]

Thanks guys in will check the RCA cable when I get home


Yes it gave me upgrade successful
If loader gave you that message then receiver is not dead, try the RCA cables and let us know. Turbo