How to upload file 4.12

[Kclee]

When I press search in wiz program it shows version 4.31 for new wiz110sr board. I try clicking in the upload button to try to upload the 4.12 file but a message says the destination 192.168.11.2 is unreachable. Please check if the device is in the same subnet with the PC. Can someone pleas help me fix this problem so I can upload the file 4.12 to my wiz board.

[Sp0iler]

First, how are you connecting the dongle.
It's recommended to use the cable that came with the box.This is a crossover cable.
If your using a gender changer, you need a crossover gender changer.

If your connecting with the cable,
Try this: C/P from one pf my other posts

Not sure of your windows version but try this:
Make sure your hardwired from your lan port...

Right click on the Network icon on your desktop and chose "properties".
Choose "change adapter settings".
Double click on "local area connection".
Locate "Internet Protocol Version 4 (TCP/IPv4)" and double click on it.
Choose "Use the following ip address"
For "IP address", enter your default gateway but make the last number .25 (ex:192.168.0.25)
"Subnet mask" is the usual 255.255.255.0
"Default gateway" is your default gateway... duh...(ex:192.168.0.1)
Dont worry about entering anything for "DNS server" and click "ok" to exit out.
Try again to load the file.
Post your results.

End C/P

Good luck,
Sp0iler