PDA

View Full Version : LNB Settings ??


forzaazzurri
03-20-2014, 03:05 PM
Hello,

is this correct for the image attached or do I need to turn on legacy SW ?

Sat: ...........................91
LNB Power....................ON
LNB Type.....................Legacy Twin LNB 1
LNB Freq......................11250
LNB 22khz....................OFF
Diseqc 1.0....................OFF
Diseqc 1.1....................OFF
Legacy SW...................OFF


Sat: ...........................82
LNB Power....................ON
LNB Type.....................Legacy Twin LNB 2
LNB Freq......................11250
LNB 22khz....................OFF
Diseqc 1.0....................OFF
Diseqc 1.1....................OFF
Legacy SW...................OFF

21189
pgjeepster
03-20-2014, 03:58 PM
set your diseqc ports, I usually set 91--1, and 82--2
forzaazzurri
03-20-2014, 04:17 PM
set your diseqc ports, I usually set 91--1, and 82--2

Even though there is no diseqc switch ???
Terryl
03-20-2014, 04:38 PM
Under "Legacy SW" is there a setting for the SW21?

If so then it may look like this.

Sat: ...........................91
LNB Power....................ON
LNB Type.....................Legacy Twin LNB 1
LNB Freq......................11250
LNB 22khz....................OFF.................or ON if if 91 is on the "ON" side of the switch
Diseqc 1.0....................OFF
Diseqc 1.1....................OFF
Legacy SW...................SW21


Sat: ...........................82
LNB Power....................ON
LNB Type.....................Legacy Twin LNB 2
LNB Freq......................11250
LNB 22khz....................OFF...................... ...or "ON" if 82 is on the "ON" side of the switch
Diseqc 1.0....................OFF
Diseqc 1.1....................OFF
Legacy SW...................SW21


And no you only use the Diseqc 1 and 2 if there is a Diseqc switchattached to the system.
forzaazzurri
03-20-2014, 04:41 PM
Yes there is an SW21 choice :) but SW21 switches just have dish 1 and dish 2 as an input and receiver as an output.
How would you know which is using the 22khz ? Trial and error I guess ?
Terryl
03-20-2014, 04:44 PM
Use that then, and turn the 22 KHz on and off respective to the attached satellite at the "22 KHz on port" at the switch.

Or some have a "Auto" setting for the 22 KHz.
torpainter
03-21-2014, 02:50 AM
change lnb to single ,have 22 off for both and set legacy switch sw21 dish 1 and sw21 dish2 for your birds
Berenjeno
03-31-2014, 03:16 AM
Yes there is an SW21 choice :) but SW21 switches just have dish 1 and dish 2 as an input and receiver as an output.
How would you know which is using the 22khz ? Trial and error I guess ?

if you have your dish like the pic on the 1 post, Legacy LNB with SW21 this is the config.

Sat 91
LNB Power on
LNB Type Single
LNB Frequenct 11.250
LNB 22Khz Off
Diseqc Sw 1.0...Off
Diseqc Sw 1.1 Off
Legacy Sw SW21 Dish 1


Sat 82
LNB Power on
LNB Type Single
LNB Frequenct 11.250
LNB 22Khz Off
Diseqc Sw 1.0...Off
Diseqc Sw 1.1 Off
Legacy Sw SW21 Dish 2