new t5

[firpo]

i got everything going thanks 2 tut but i don't have an option 2 program 129 it shows 129 w ciel but my coolsat which i used 2 find it has it any help would b appreciated

[dishuser]

ceil 2 is 129w
that's what you want

[firpo]

Hey dishuser how r u bro long time, hope ur doing great i got no picture thou on 129 what channel do i check it on?

do i have the rt lnb and dish 4 it ? i just turned the 110 so i could pick up 129 is that ok?
can i get someone 2 stay with me 2 c me through this set up it is new 2 me

also shouts out 2 some the guys that have helped me out patric, pugscan,mabs,torpainter

[torpainter]

Hey dishuser how r u bro long time, hope ur doing great i got no picture thou on 129 what channel do i check it on?

do i have the rt lnb and dish 4 it ? i just turned the 110 so i could pick up 129 is that ok?
can i get someone 2 stay with me 2 c me through this set up it is new 2 me

also shouts out 2 some the guys that have helped me out patric, pugscan,mabs,torpainter
The 110 lnb will work fine At the top right in dish settings it will show the sat you are locked on You can use your coolsat to tune into 129 but you need to use tp 12516

[firpo]

I used the coolsat to tune on but on that it was 129 ecostar 3 i think but on this its 129 ceil but im not getting any channels in and when i go 2 settings it show i am tuned in what gives? and where do i input tp 12516 ?

could it b i have a bad hd module

[torpainter]

I used the coolsat to tune on but on that it was 129 ecostar 3 i think but on this its 129 ceil but im not getting any channels in and when i go 2 settings it show i am tuned in what gives? and where do i input tp 12516 ?

could it b i have a bad hd module

the only sd tp on sat 129 is tp 12516 You would go there under manual scan There are a few hd channels on sat 110 and 119 You can check lyngsat for them

[firpo]

i have been watching 105 USA but its the same quality i had with cnx nano2
more importantly i need help getting 129 in plz do i have the rt dish and everything?

ok im going 2 bed can 1 of u guys set a time to help me plz i really dont no this stuff 2 well ty

[jedi]

What kind of dish do you have - does it have Dish PRO LNBs or is it Legacy?
If you had 129 working with your Coolsat - then chances are you should be able to get a signal with this T5. When you go to Installation and Dish Configuration if you select the 129 Satellite do you lock onto the signal?
I just helped a friend set up a new T5 - but he has it now so I don't have a box here to give you the exact steps to follow.

[torpainter]

i have been watching 105 USA but its the same quality i had with cnx nano2
more importantly i need help getting 129 in plz do i have the rt dish and everything?

ok im going 2 bed can 1 of u guys set a time to help me plz i really dont no this stuff 2 well ty

Of course 105 would be the same it's a SD channel 9421on sat 110 is a free HD channel Do you get that channel?

[firpo]

i turned the 110 to 129 so i dont have 110 anymore just 119/118 and the other dish is pointed to 129 and im not getting 9421 all black on 129


Of course 105 would be the same it's a SD channel 9421on sat 110 is a free HD channel Do you get that channel?

[firpo]

i have 2 dishes outside 1 gets me 129 on port 1 the other gets me 119/118 on port 2 the r both single lnb with hook up for 2 cables. i am also using a cheetah switch. both r getting over 90% sig and quality.

OK FOLKS I got it going now the only thing i have 2 figure out is the channels all the hd channel r up over 4000 am i right? also i have 4x the same channels in some spots. any help would b good. and ty


What kind of dish do you have - does it have Dish PRO LNBs or is it Legacy?
If you had 129 working with your Coolsat - then chances are you should be able to get a signal with this T5. When you go to Installation and Dish Configuration if you select the 129 Satellite do you lock onto the signal?
I just helped a friend set up a new T5 - but he has it now so I don't have a box here to give you the exact steps to follow.

[torpainter]

Go into system recovery and delete all your channels Rescan 129 and see if the HD channels in the high 9400's scan in Compare them to the channels on lyngsat 129 did. Did you install the HD board yourself? Who did you buy it from?

[firpo]

i got it going ty all